alcohol

alcohol
/al"keuh hawl', -hol'/, n.
1. Also called ethyl alcohol, grain alcohol, ethanol, fermentation alcohol. a colorless, limpid, volatile, flammable, water-miscible liquid, C2H5OH, having an etherlike odor and pungent, burning taste, the intoxicating principle of fermented liquors, produced by yeast fermentation of certain carbohydrates, as grains, molasses, starch, or sugar, or obtained synthetically by hydration of ethylene or as a by-product of certain hydrocarbon syntheses: used chiefly as a solvent in the extraction of specific substances, in beverages, medicines, organic synthesis, lotions, tonics, colognes, rubbing compounds, as an automobile radiator antifreeze, and as a rocket fuel. Cf. denatured alcohol, methyl alcohol.
2. whiskey, gin, vodka, or any other intoxicating liquor containing this liquid.
3. Chem. any of a class of chemical compounds having the general formula ROH, where R represents an alkyl group and -OH a hydroxyl group, as in methyl alcohol, CH3OH, or ethyl alcohol, C2H5OH.
[1535-45; < NL < ML < Ar al-kuhl the powdered antimony, the distillate]

* * *

I
Any of a class of common organic compounds that contain one or more hydroxyl groups (―OH) attached to one or more of the carbon atoms in a hydrocarbon chain.

The number of other substituent groups (R) on that carbon atom make the alcohol a primary (RCH2OH), secondary (R2CHOH), or tertiary (R3COH) alcohol. Many alcohols occur naturally and are valuable intermediates in the synthesis of other compounds because of the characteristic chemical reactions of the hydroxyl group. Oxidation (see oxidation-reduction) of primary alcohols yields aldehydes and (if taken further) carboxylic acids; oxidation of secondary alcohols, ketones. Tertiary alcohols break down on oxidation. Alcohols generally react with carboxylic acids to produce esters. They may also be converted to ethers and olefins. Products of these numerous reactions include fats and waxes, detergents, plasticizers, emulsifiers, lubricants, emollients, and foaming agents. Ethanol (grain alcohol) and methanol (wood alcohol) are the best-known alcohols with one hydroxyl group. Glycols (e.g., ethylene glycol, or antifreeze) contain two hydroxyl groups, glycerol three, and polyols three or more. See also alcoholic beverage, alcoholism.
II
(as used in expressions)
Alcohol Tobacco and Firearms Bureau of

* * *

Introduction

      any of a class of organic compounds characterized by one or more hydroxyl (−OH) groups attached to a carbon atom of an alkyl group ( hydrocarbon chain). Alcohols may be considered as organic derivatives of water (H2O) in which one of the hydrogen atoms has been replaced by an alkyl group, typically represented by R in organic structures. For example, in ethanol (or ethyl alcohol) the alkyl group is the ethyl group, −CH2CH3.

      Alcohols are among the most common organic compounds (organic compound). They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Perhaps the two best-known alcohols are ethanol and methanol (or methyl alcohol). Ethanol is used in toiletries, pharmaceuticals, and fuels, and it is used to sterilize hospital instruments. It is, moreover, the alcohol in alcoholic beverages (alcoholic beverage). The anesthetic ether is also made from ethanol. Methanol is used as a solvent, as a raw material for the manufacture of formaldehyde and special resins (resin), in special fuels, in antifreeze, and for cleaning metals.

      Alcohols may be classified as primary, secondary, or tertiary, according to which carbon of the alkyl group is bonded to the hydroxyl group. Most alcohols are colourless liquids (liquid) or solids (solid) at room temperature. Alcohols of low molecular weight are highly soluble in water; with increasing molecular weight, they become less soluble in water, and their boiling points (boiling point), vapour pressures (vapour pressure), densities (density), and viscosities (viscosity) increase.

      This article covers the structure and classification, physical properties, commercial importance, sources, and reactions of alcohols. For more information about closely related compounds, see chemical compound, phenol, and ether.

Structure and classification of alcohols
      Similar to water, an alcohol can be pictured as having an sp3 hybridized tetrahedral oxygen atom with nonbonding pairs of electrons (electron) occupying two of the four sp3 hybrid orbitals. (See chemical bonding for a discussion of hybrid orbitals.) Alkyl groups are generally bulkier than hydrogen atoms, however, so the R−O−H bond angle in alcohols is generally larger than the 104.5° H−O−H bond angle in water. For example, the 108.9° bond angle in methanol shows the effect of the methyl group, which is larger than the hydrogen atom of water.

      One way of classifying alcohols is based on which carbon atom is bonded to the hydroxyl group. If this carbon is primary (1°, bonded to only one other carbon atom), the compound is a primary alcohol. A secondary alcohol has the hydroxyl group on a secondary (2°) carbon atom, which is bonded to two other carbon atoms. Similarly, a tertiary alcohol has the hydroxyl group on a tertiary (3°) carbon atom, which is bonded to three other carbons. Alcohols are referred to as allylic or benzylic if the hydroxyl group is bonded to an allylic carbon atom (adjacent to a C=C double bond) or a benzylic carbon atom (next to a benzene ring), respectively.

      As with other types of organic compounds, alcohols are named by both formal and common systems. The most generally applicable system is that adopted at a meeting of the International Union of Pure and Applied Chemistry (IUPAC) in Paris in 1957. Using the IUPAC system, the name for an alcohol uses the -ol suffix with the name of the parent alkane (paraffin hydrocarbon), together with a number to give the location of the hydroxyl group. The rules are summarized in a three-step procedure:
● Name the longest carbon chain that contains the carbon atom bearing the −OH group. Drop the final -e from the alkane name, and add the suffix -ol.
● Number the longest carbon chain starting at the end nearest the −OH group, and use the appropriate number, if necessary, to indicate the position of the −OH group.
● Name the substituents, and give their numbers as for an alkane or alkene.

      The first example below has a longest chain of six carbon atoms, so the root name is hexanol. The −OH group is on the third carbon atom, which is indicated by the name 3-hexanol. There is a methyl group on carbon 3 and a chlorine atom on carbon 2. The complete IUPAC name is 2-chloro-3-methyl-3-hexanol. The prefix cyclo- is used for alcohols with cyclic alkyl groups. The hydroxyl group is assumed to be on carbon 1, and the ring is numbered in the direction to give the lowest possible numbers to the other substituents, as in, for example, 2,2-dimethylcyclopentanol.

Common names
      The common name of an alcohol combines the name of the alkyl group with the word alcohol. If the alkyl group is complex, the common name becomes awkward and the IUPAC name should be used. Common names often incorporate obsolete terms in the naming of the alkyl group; for example, amyl is frequently used instead of pentyl for a five-carbon chain.

Physical properties of alcohols
       Physical properties of selected alcoholsMost of the common alcohols are colourless liquids at room temperature. Methyl alcohol, ethyl alcohol, and isopropyl alcohol are free-flowing liquids with fruity odours. The higher alcohols—those containing 4 to 10 carbon atoms—are somewhat viscous, or oily, and they have heavier fruity odours. Some of the highly branched alcohols and many alcohols containing more than 12 carbon atoms are solids at room temperature. Physical properties of selected alcohols

      The boiling points (boiling point) of alcohols are much higher than those of alkanes with similar molecular weights. For example, ethanol, with a molecular weight (MW) of 46, has a boiling point of 78 °C (173 °F), whereas propane (MW 44) has a boiling point of −42 °C (−44 °F). Such a large difference in boiling points indicates that molecules of ethanol are attracted to one another much more strongly than are propane molecules. Most of this difference results from the ability of ethanol and other alcohols to form intermolecular hydrogen bonds. (See chemical bonding: Intermolecular forces (chemical bonding) for a discussion of hydrogen bonding.)

      The oxygen atom of the strongly polarized O−H bond of an alcohol pulls electron density away from the hydrogen atom. This polarized hydrogen, which bears a partial positive charge, can form a hydrogen bond with a pair of nonbonding electrons on another oxygen atom. Hydrogen bonds, with a strength of about 5 kilocalories (21 kilojoules) per mole, are much weaker than normal covalent bonds (covalent bond), with bond energies of about 70 to 110 kilocalories per mole. (The amount of energy per mole that is required to break a given bond is called its bond energy.)

       water and alcohols have similar properties because water molecules contain hydroxyl groups that can form hydrogen bonds with other water molecules and with alcohol molecules, and likewise alcohol molecules can form hydrogen bonds with other alcohol molecules as well as with water. Because alcohols form hydrogen bonds with water, they tend to be relatively soluble in water. The hydroxyl group is referred to as a hydrophilic (“water-loving”) group, because it forms hydrogen bonds with water and enhances the solubility of an alcohol in water. Methanol, ethanol, n-propyl alcohol, isopropyl alcohol, and t- butyl alcohol are all miscible with water. Alcohols with higher molecular weights tend to be less water-soluble, because the hydrocarbon part of the molecule, which is hydrophobic (“water-hating”), is larger with increased molecular weight. Because they are strongly polar, alcohols are better solvents than hydrocarbons (hydrocarbon) for ionic compounds and other polar substances.

Commercially important alcohols

       methanol (methyl alcohol) was originally produced by heating wood chips in the absence of air. Some of the carbohydrates (carbohydrate) in the wood are broken down to form methanol, and the methanol vapour is then condensed. This process led to the name wood alcohol as another common name for methanol. Methanol is synthesized commercially by a catalytic reaction of carbon monoxide (CO) with hydrogen gas (H2) under high temperature and pressure.

      The mixture of carbon monoxide and hydrogen needed to make methanol can be generated by the partial burning of coal in the presence of water. By carefully regulating the amount of water added, the correct ratio of carbon monoxide to hydrogen can be obtained.

      Methanol has excellent properties as a polar organic solvent and is widely used as an industrial solvent. It is more toxic than ethanol, however, and may cause blindness or death if large amounts are inhaled or ingested.

      Methanol has a high octane rating and a low emission of pollutants—characteristics that make it a valuable fuel for automobile engines. From the late 1960s until 2006, the cars at the Indianapolis 500, the automobile race held annually at the Indianapolis Motor Speedway, were powered by methanol-burning engines. Methanol was once under consideration as a commercial motor fuel because it is cheaper than ethanol and can be made from natural gas and coal resources. However, increasing interest in ethanol-based fuels and difficulties involving the solvent properties of methanol, which cause problems with fuel systems—especially in fuel-injected cars—have resulted in diminished commercial interest in methanol fuels. Methanol tends to dissolve the plastic and rubber components employed in modern fuel systems, and different materials must be used that can survive exposure to methanol over long periods of time without dissolving or cracking.

Ethanol (ethyl alcohol)
 Ethanol ( ethyl alcohol) has been produced since prehistoric times, mostly through the fermentation of fruit juices. The fermented juice could be stored in a sealed container, and this primitive wine remained safe to drink throughout the winter. Many different sources can provide the sugars (sugar) and starches (starch) that are broken down to simpler compounds during fermentation. Ethanol is called grain alcohol because it is often made from grains, such as corn (maize), wheat, rye, and barley. The grain is first boiled in water to produce the mash, which is incubated with malt (sprouted barley) to yield the wort. Malt provides an enzyme (diastase) that converts starches in the grain to the sugar maltose. The wort is incubated with brewer's yeast, which secretes the enzyme maltase to convert maltose to glucose and the enzyme zymase to convert glucose to ethanol. Two of the six carbon atoms in glucose are oxidized to carbon dioxide (CO2); this oxidation provides energy to the yeast cells.

      Fermentation yields a solution that is only about 12–15 percent alcohol because higher concentrations are toxic to the yeast cells. This solution can be distilled, however, to raise the ethanol content to as high as 95 percent.

      Fermentation is a relatively expensive method of making ethanol. Industrial ethanol is more commonly synthesized by the high-temperature catalytic addition of water to ethylene (C2H4).

      Ethanol is an excellent motor fuel with a high octane rating and low emissions; however, it should be used in a fuel system designed to withstand the alcohol's tendency to dissolve plastic parts. Solutions of 10 percent ethanol in gasoline (gasohol) can be used in most cars without any adjustments. Today, ethanol fuels are typically made from natural products, such as corn or sugar.

       isopropyl alcohol (2-propanol) is made by indirect hydration of propylene (CH2CHCH3). Isopropyl alcohol is commonly used as an industrial solvent and as a rubbing alcohol applied to the skin. Although isopropyl alcohol is more toxic than ethanol, it has less of a drying effect on the skin, and it is not regulated and taxed by the U.S. government as is ethanol.

      The name ethylene glycol refers literally to “the glycol made from ethylene.” Its systematic name is ethane-1,2-diol. Ethylene glycol is commonly used as automotive antifreeze and as an ingredient in hydraulic fluids, printing inks, and paint solvents. It is also used as a reagent in making polyesters (polyester), explosives (explosive), alkyd resins (resin), and synthetic waxes (wax).

       glycerol (also called glycerine) is a sweet syrupy substance with three alcohol hydroxyl groups. Its systematic name is propane-1,2,3-triol. Glycerol was first obtained as a by-product of soap manufacture, through the saponification ( hydrolysis in base) of fats. About 25 kg (60 pounds) of glycerol is obtained with each ton of soap. It can also be obtained by fermentation from molasses and sugar. During World War II, large quantities of glycerol were needed for the production of glyceryl trinitrate ( nitroglycerin); this need was met by synthetic glycerol made from propylene, CH2=CH−CH3.

      A large amount of glycerol is still used for making nitroglycerin, which is the primary explosive in dynamite and blasting gelatin. Nitroglycerin is also used as a coronary vasodilator (a drug that relaxes and expands blood vessels (blood vessel)) for symptomatic relief of chest pain caused by poor circulation to the heart. Glycerol is also used as a solvent, moisturizing agent, plasticizer, antifreeze, and water-soluble lubricant. It is found in a wide variety of products, including foods, soaps, cosmetics, printing inks, hydraulic fluids, and pharmaceuticals.

Sources of alcohols

Natural products
  The common sources of methanol, ethanol, and isopropyl alcohol have been discussed above. Larger, more complicated alcohols are often isolated from volatile oils of plants by the process of steam distillation. The plant material is boiled in water, and the volatile oils are carried over by the steam, condensed, and separated from the water. Substances such as cholesterol, found in most animal tissues (and abundant in egg yolks), and retinol ( vitamin A alcohol), extracted from fish liver oils, are examples of naturally occurring sources of alcohols.

      Long-chain alcohols can be obtained from fats (fat) and waxes (wax) by hydrolysis in base, called saponification, followed by reduction.

Reduction of carbonyl compounds
      The addition of two hydrogen atoms to a carbonyl group produces an alcohol. This is an example of a reduction. Ketones (ketone), aldehydes (aldehyde), and carboxylic acids (carboxylic acid) are reduced by the catalytic addition of gaseous hydrogen (H2) or by a wide variety of specific reducing agents, such as lithium aluminum hydride (LiAlH4) and sodium borohydride (NaBH4).

Hydration of alkenes (olefin)
      The addition of water (hydration) across the double bond of an alkene yields an alcohol. Alkenes are available as products of coal tar and petroleum refining, and a variety of catalytic conditions can support the addition of water across the double bond. In most cases, water adds in the direction that places the new hydroxyl group on the more highly substituted end of the double bond according to the Markovnikov rule, as in acid-catalyzed hydrations. (The more highly substituted end of the double bond is the one that is bonded to more carbon atoms.)

      Hydroboration-oxidation is also useful for adding water across the double bond of an alkene; however, hydroboration-oxidation gives an anti-Markovnikov orientation of the addition product, with the hydroxyl group adding to the less-substituted end of the double bond.

      Alkenes may be converted to diols (dialcohols) by oxidizing agents such as potassium permanganate (KMnO4).

      These oxidations must be carried out carefully to avoid overoxidation and breaking of the double bond.

Displacement of halides
      A hydroxide ion can displace a halide ion from a primary alkyl halide (RCH2X, where X is a halogen (halogen element)) to give an alcohol. This displacement reaction is not frequently used to synthesize alcohols, however, because alkyl halides are more commonly synthesized from alcohols rather than vice versa.

Using Grignard (Grignard reagent) and organolithium reagents
      Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols. A Grignard reagent is formed by reaction of an alkyl halide (RX, where X is a halogen) with magnesium metal (Mg) in an ether solution. The product is written as R−Mg−X, although Grignard reagents are known to be more complicated than this simple structure suggests. Organolithium reagents (RLi) are formed in much the same way as Grignard reagents, except that an ether solvent is not required. Most reactions of organolithium reagents are similar to those of Grignard reagents; however, there are some important differences.

      Grignard reagents add to carbonyl compounds (i.e., compounds containing the C=O functional group) to produce magnesium alkoxides (ROMgX) that are hydrolyzed to alcohols. A wide variety of alcohols can be synthesized by Grignard additions. A Grignard reagent adds to formaldehyde to give a primary alcohol with one additional carbon atom, to an aldehyde to give a secondary alcohol, and to a ketone to yield a tertiary alcohol.

      Grignard reagents add twice to esters (ester) to give alcohols (upon hydrolysis). This technique is valuable for making secondary and tertiary alcohols with two identical alkyl groups. They also add to epoxides (epoxide), yielding primary alcohols in which two additional carbon atoms have been added to the chain of the Grignard reagent.

Reactions of alcohols
      Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. A multistep synthesis may use Grignard-like reactions to form an alcohol with the desired carbon structure, followed by reactions to convert the hydroxyl group of the alcohol to the desired functionality. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution (substitution reaction), esterification, and reactions of alkoxides.

Oxidation
 Alcohols may be oxidized to give ketones (ketone), aldehydes (aldehyde), and carboxylic acids (carboxylic acid). These functional groups are useful for further reactions; for example, ketones and aldehydes can be used in subsequent Grignard reactions, and carboxylic acids can be used for esterification. Oxidation of organic compounds (organic compound) generally increases the number of bonds from carbon to oxygen (or another electronegative element, such as a halogen), and it may decrease the number of bonds to hydrogen.

      Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.

      Chromic acid (H2CrO4, generated by mixing sodium dichromate, Na2Cr2O7, with sulfuric acid, H2SO4) is an effective oxidizing agent for most alcohols. It is a strong oxidant, and it oxidizes the alcohol as far as possible without breaking carbon-carbon bonds. Chromic acid oxidizes primary alcohols to carboxylic acids, and it oxidizes secondary alcohols to ketones. Tertiary alcohols do not react with chromic acid under mild conditions. With a higher temperature or a more concentrated acid, carbon-carbon bonds may be oxidized; however, yields from such strong oxidations are usually poor.

      Oxidizing a primary alcohol only as far as the aldehyde stage is more difficult because of the ease with which aldehydes are oxidized to acids. Special reagents have been developed to convert primary alcohols to aldehydes. Pyridinium chlorochromate, often abbreviated PCC, is a milder oxidant than chromic acid and oxidizes most primary alcohols to aldehydes. PCC is a complex of chromium trioxide (CrO3) with pyridine (C5H5N) and hydrogen chloride (HCl), written as pyridine ∙ CrO3 ∙ HCl.

Biological oxidation
      All substances are toxic if taken in large enough quantities, and alcohols are no exception. Although ethanol (ethyl alcohol) is less toxic than methanol, it is nonetheless a poisonous substance, and many people die each year from ethanol poisoning. When someone is suffering from mild ethanol poisoning, the person is said to be intoxicated. Because animals often consume food that has fermented and contains ethanol, their bodies have developed methods to remove or detoxify ethanol before it can accumulate and poison the brain. One way the body detoxifies ethanol is to oxidize it, using an enzyme produced by the liver, alcohol dehydrogenase, or ADH. Alcohol dehydrogenase catalyzes the oxidation of ethanol to acetaldehyde, which is further oxidized to acetic acid (as the acetate ion), a normal metabolite. The actual oxidizing agent is the oxidized form of nicotinamide adenine dinucleotide, NAD+.

      The body's response to simple alcohols is to oxidize them. This strategy works well with ethanol, because the product is acetate, a normal metabolite. When other alcohols are ingested, however, oxidation may lead to other toxic products. For example, oxidation of methanol produces formaldehyde and subsequently formic acid (as the formate ion); both of these products are more toxic than methanol itself. ethylene glycol (automotive antifreeze) is oxidized to oxalic acid (as the oxalate ion), the toxic compound found in rhubarb leaves and many other plants. Ethylene glycol has a sweet taste, and many dogs and cats are poisoned each year by drinking automotive antifreeze that has been carelessly discarded.

      One common treatment for methanol or ethylene glycol poisoning is to give the patient intravenous infusions of diluted ethanol. The ADH enzyme is kept occupied by oxidizing ethanol to acetic acid, giving the kidneys (kidney) time to excrete most of the methanol or ethylene glycol before it is oxidized to more toxic compounds. This is an example of competitive inhibition of an enzyme (see poison: Nature of a toxic substance (poison)).

Dehydration to alkenes
      Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Because the elements of water are removed, this reaction is called a dehydration. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.

      Most alcohol dehydrations take place by the mechanism shown below. Protonation of the hydroxyl group allows it to leave as a water molecule. The species that remains has a carbon atom with only three bonds and a positive charge and is called a carbocation. This intermediate species can be stabilized by loss of a proton from a carbon atom adjacent to the positively charged carbon ion, giving the alkene.

      Because they involve carbocation intermediates, alcohol dehydrations go more quickly and easily if they form relatively stable carbocations. More highly substituted carbocations are more stable (3° > 2° > 1°); therefore, more highly substituted alcohols undergo dehydration more readily than less highly substituted alcohols (3° > 2° > 1°). Carbocations can undergo rearrangements in which an alkyl group, aryl group, or hydrogen atom, along with its bonding electrons (electron), shifts to the positively charged carbon atom to form a more stable species. Rearrangements are thus a common nuisance in alcohol dehydrations. If more than one alkene can be formed in a dehydration, the major product is usually the product with the most highly substituted double bond (Saytzeff's rule).

Dehydration to ethers
      Under carefully controlled conditions, simple alcohols can undergo intermolecular dehydration to give ethers (ether). This reaction is effective only with methanol, ethanol, and other simple primary alcohols, but it is the most economical method for making ethyl ether (also known as diethyl ether), an important industrial solvent.

Substitution to form alkyl halides
      Alkyl halides are often synthesized from alcohols, in effect substituting a halogen (halogen element) atom for the hydroxyl group. Hydrochloric (HCl), hydrobromic (HBr), and hydroiodic (HI) acids are useful reagents for this substitution, giving their best yields with tertiary alcohols. Thionyl chloride (SOCl2), phosphorus tribromide (PBr3), and phosphorus triiodide (generated from phosphorus, P, and molecular iodine, I2) are also useful for making alkyl chlorides, bromides, and iodides, respectively.

Esterification
      Alcohols can combine with many kinds of acids (acid) to form esters (ester). When no type of acid is specified, the word ester is assumed to mean a carboxylic ester, the ester of an alcohol and a carboxylic acid. The reaction, called Fischer esterification, is characterized by the combining of an alcohol and an acid (with acid catalysis) to yield an ester plus water.

      Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used.

Acidity of alcohols: formation of alkoxides
      Alcohols are weak acids. The most acidic simple alcohols (methanol and ethanol) are about as acidic as water, and most other alcohols are somewhat less acidic.

      A strong base can deprotonate an alcohol to yield an alkoxide ion (R−O). For example, sodamide (NaNH2), a very strong base, abstracts the hydrogen atom of an alcohol. Metallic sodium (Na) or potassium (K) is often used to form an alkoxide by reducing the proton to hydrogen gas.

      Alkoxides can be useful reagents. For example, the most common synthesis of ethers involves the attack of an alkoxide ion on an alkyl halide. This method is called Williamson ether synthesis (see ether).

Leroy G. Wade, Jr.

Additional Reading
Carl R. Noller, Chemistry of Organic Compounds, 3rd ed. (1965), is a classic textbook using an older style of teaching organic chemistry, with heavy emphasis on history, industrial chemistry, and nomenclature. More-modern coverage of organic chemistry, including the chemistry of alcohols, is provided by D.R. Bloch, Organic Chemistry Demystified (2006). More-specialized treatment appears in Derek Barton and W. David Ollis (eds.), Comprehensive Organic Chemistry, vol. 1, Stereochemistry, Hydrocarbons, Halo Compounds, Oxygen Compounds, ed. by J.F. Stoddart (1979), part 4, “Alcohols, Phenols, Ethers, and Related Compounds,” pp. 577–939.Leroy G. Wade, Jr.

* * *


Universalium. 2010.

Игры ⚽ Нужно сделать НИР?
Synonyms:

Look at other dictionaries:

  • Alcohol 52% — Alcohol 120% / Alcohol 52% Entwickler: Alcohol Software Aktuelle Version: 1.9.8.7530 (2. April 2009) Betriebssystem: Microsoft Windows ab 2000[1] Kategorie …   Deutsch Wikipedia

  • alcohol — (Del ár. hisp. kuḥúl, y este del ár. clás. kuḥl). 1. m. Quím. Cada uno de los compuestos orgánicos que contienen el grupo hidroxilo unido a un radical alifático o a alguno de sus derivados. 2. por antonom. alcohol etílico. 3. Bebida que contiene… …   Diccionario de la lengua española

  • Alcohol — Al co*hol ([a^]l k[ o]*h[o^]l), n. [Cf. F. alcool, formerly written alcohol, Sp. alcohol alcohol, antimony, galena, OSp. alcofol; all fr. Ar. al kohl a powder of antimony or galena, to paint the eyebrows with. The name was afterwards applied, on… …   The Collaborative International Dictionary of English

  • alcohol — m. bioquím. Nombre de diversas sustancias orgánicas formadas por carbono, hidrógeno y oxígeno que derivan de los hidrocarburos al ser substituidos uno o varios átomos de hidrógeno por otros tantos hidroxilos (OH). En el organismo, el consumo de… …   Diccionario médico

  • alcohol — sustantivo masculino 1. Líquido de olor fuerte, incoloro e inflamable, que se obtiene de la destilación de ciertas sustancias, azucaradas o feculentas, fermentadas: cuarenta grados de alcohol. alcohol etílico. 2. Bebida que contiene este líquido …   Diccionario Salamanca de la Lengua Española

  • Alcohol 52% — Alcohol 120% Alcohol 120% Développeur Alcohol Software Dernière version 1.9.8.7612/ 27/04/ …   Wikipédia en Français

  • Alcohol 52 % — Alcohol 120% Alcohol 120% Développeur Alcohol Software Dernière version 1.9.8.7612/ 27/04/ …   Wikipédia en Français

  • alcohol — [al′kə hôl΄, al′kəhäl΄] n. [ML, term used by PARACELSUS Philippus Aureolus for fine powder, distilled spirit < Ar alkuḥl, antimony powder, collyrium < al, the + kuḥl, KOHL] 1. a colorless, volatile, pungent liquid, C2H5OH: it can be burned… …   English World dictionary

  • Alcohol — steht für Alcohol 120% Alcohol Creek Siehe auch Alkohol Diese Seite ist eine Begriffsklärung zur Unterscheidung mehrerer mit demselben Wort bezeichneter Begriffe …   Deutsch Wikipedia

  • alcohol — noun alcoholic beverage, inebriant, intoxicant, intoxicating liquor, liquor, potation, spirits Burton s Legal Thesaurus. William C. Burton. 2006 alcohol The act …   Law dictionary

  • alcohol — (n.) 1540s (early 15c. as alcofol), fine powder produced by sublimation, from M.L. alcohol powdered ore of antimony, from Arabic al kuhul kohl, the fine metallic powder used to darken the eyelids, from kahala to stain, paint. The al is the Arabic …   Etymology dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”