carbide

carbide
/kahr"buyd, -bid/, n.
1. a compound of carbon with a more electropositive element or group.
3. a very hard mixture of sintered carbides of various heavy metals, esp. tungsten carbide, used for cutting edges and dies.
[1860-65; CARB- + -IDE]

* * *

Inorganic compound, any of a class of chemical compounds in which carbon is combined with a metal or semimetallic element.

The nature of the second element (its position in the periodic table) determines the carbide's type of bonding and its properties. Calcium carbide is useful as a source of acetylene. Carbides of tungsten, silicon (see Carborundum), and boron, called refractory carbides, are extremely hard, remain stable when heated, and have a high melting point and chemical resistance. They are used as abrasives and in cutting tools, as furnace linings, and in other high-temperature applications. Iron carbide (cementite) is an important constituent of steel and cast iron.

* * *

Introduction

      any of a class of chemical compounds in which carbon is combined with a metallic or semimetallic element. Calcium carbide is important chiefly as a source of acetylene and other chemicals, whereas the carbides of silicon, tungsten, and several other elements are valued for their physical hardness, strength, and resistance to chemical attack even at very high temperatures. iron carbide (cementite) is an important constituent of steel and cast iron.

Preparation of carbides
      Carbides are prepared from carbon and an element of similar or lower electronegativity, usually either a metal or a metal oxide, at temperatures of 1,000–2,800 °C (1,800–5,100 °F). Almost any carbide can be prepared by one of several general methods. The first method involves direct combination of the elements at high temperatures (2,000 °C [3,600 °F] or higher). The second method is the reaction of a compound of a metal, usually an oxide, with carbon at high temperature. Two additional methods involve reaction of a metal or metal salt with a hydrocarbon, usually acetylene, C2H2. In one of the methods, the heated metal reacts with a gaseous hydrocarbon; in the other, a metal is dissolved in liquid ammonia, NH3, and the hydrocarbon is bubbled through the solution. Carbides that are prepared with acetylene are called acetylides and contain the C22− anion. For example, the alkali metal acetylides are best prepared by dissolving the alkali metal in liquid ammonia and passing acetylene through the solution. These compounds, which have the general formula M2C2 (where M is the metal), are colourless, crystalline solids. They react violently with water and, when heated in air, are oxidized to the carbonate. The alkaline-earth (alkaline-earth metal) carbides also are acetylides. They have the general formula MC2 and are prepared by heating the alkaline-earth metal with acetylene above 500 °C (900 °F).

Classification of carbides
      Classification of carbides based on structural type is rather difficult, but three broad classifications arise from general trends in their properties. The most electropositive metals form ionic or saltlike carbides, the transition metals in the middle of the periodic table tend to form what are called interstitial carbides, and the nonmetals of electronegativity similar to that of carbon form covalent or molecular carbides.

Ionic carbides
      Ionic carbides have discrete carbon anions of the forms C4−, sometimes called methanides since they can be viewed as being derived from methane, (CH4); C22−, called acetylides and derived from acetylene (C2H2); and C34−, derived from allene (C3H4). The best-characterized methanides are probably beryllium carbide (Be2C) and aluminum carbide (Al4C3). beryllium oxide (BeO) and carbon react at 2,000 °C (3,600 °F) to produce the brick-red beryllium carbide, whereas pale yellow aluminum carbide is prepared from aluminum and carbon in a furnace. Aluminum carbide reacts as a typical methanide with water to produce methane.

Al4C3 + 12H2O → 4Al(OH)3 + 3CH4

      There are many acetylides that are well known and well characterized. In addition to those of the alkali metals and the alkaline-earth metals mentioned above, lanthanum (La) forms two different acetylides, and copper (Cu), silver (Ag), and gold (Au) form explosive acetylides. zinc (Zn), cadmium (Cd), and mercury (Hg) also form acetylides, although they are not as well characterized. The most important of these compounds is calcium carbide, CaC2. The primary use for calcium carbide is as a source of acetylene for use in the chemical industry. Calcium carbide is synthesized industrially from calcium oxide ( lime), CaO, and carbon in the form of coke at about 2,200 °C (4,000 °F). Pure calcium carbide has a high melting point (2,300 °C [4,200 °F]) and is a colourless solid. The reaction of CaC2 with water yields C2H2 and a significant amount of heat, so the reaction is carried out under carefully controlled conditions.

CaO + 3C → CaC2 + CO
CaC2 + 2H2O → C2H2 + Ca(OH)2
Calcium carbide also reacts with nitrogen gas at elevated temperatures (1,000–1,200 °C [1,800–2,200 °F]) to form calcium cyanamide, CaCN2.
CaC2 + N2 → CaCN2 + C
This is an important industrial reaction because CaCN2 finds extensive use as a fertilizer owing to its reaction with water to produce cyanamide, H2NCN. Most MC2 acetylides have the CaC2 structure, which is derived from the cubic sodium chloride (NaCl) structure. The C2 units lie parallel along the cell axes, causing a distortion of the cell from cubic to tetragonal.

Interstitial carbides
      Interstitial carbides are derived primarily from relatively large transition metals (transition element) that act as a host lattice for the small carbon atoms, which occupy the interstices of the close-packed metal atoms. (See crystal for a discussion of packing arrangements in solids.) Interstitial carbides are characterized by extreme hardness but at the same time extreme brittleness. They have very high melting points (melting point) (typically about 3,000–4,000 °C [5,400–7,200 °F]) and retain many of the properties associated with the metal itself, such as high conductivity of heat and electricity as well as metallic lustre. At elevated temperatures some interstitial carbides retain the mechanical properties of metals, such as malleability. Many of the early transition metals have radii that are large enough to form interstitial monocarbides, MC. The critical (i.e., minimum) radius appears to be approximately 1.35 angstroms (angstrom) (1.35 × 10−8 cm, or 5.32 × 10−9 inch). However, most transition metals form interstitial carbides of several stoichiometries (stoichiometry). For example, manganese (Mn) is known to form at least five different interstitial carbides. In contrast to the ionic carbides, most interstitial carbides do not react with water and are chemically inert. Several have industrial importance, including tungsten carbide (WC) and tantalum carbide (TaC), which are used as high-speed cutting tools because of their extreme hardness and chemical inertness. Iron carbide (cementite), Fe3C, is an important component in steel.

Covalent carbides
      There are only two carbides that are considered completely covalent; they are formed with the two elements that are most similar to carbon in size and electronegativity, boron (B) and silicon (Si). silicon carbide (SiC) is known as carborundum and is prepared by the reduction of silicon dioxide (SiO2) with elemental carbon in an electric furnace. This material, like diamond, is extremely hard and is used industrially as an abrasive. It is chemically inert and has a diamond structure in which each silicon atom and each carbon atom are surrounded tetrahedrally by four atoms of the other type. boron carbide (B4C) has similar properties. It is also extremely hard and inert. It is prepared by the reduction of boron oxide (B2O3) with carbon in an electric furnace. In the structure of B4C, the boron atoms occur in icosahedral groups of 12, and the carbon atoms occur in linear chains of three. Another boron carbide (BC3), which has a graphitelike structure, is produced from the reaction of benzene (C6H6) and boron trichloride (BCl3) at 800 °C (1,500 °F).

Steven S. Zumdahl

* * *


Universalium. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Carbide.c++ — Saltar a navegación, búsqueda Carbide.c++ www.forum.nokia.com Información general Última versión estable 2.0 …   Wikipedia Español

  • Carbide —   [lateinisch], Singular Carbid das, (e)s, chemische Verbindungen von Elementen mit Kohlenstoff; sie werden allgemeinen in die Gruppen der salzartigen, kovalenten und metallischen Carbide unterteilt.   Die salzartigen Carbide sind ionisch… …   Universal-Lexikon

  • carbide — [kär′bīd΄] n. [ CARB + IDE] a solid compound of an element, usually a metal, with carbon; esp., calcium carbide …   English World dictionary

  • Carbide — Car bide, n. [Carbon + ide.] (Chem.) A binary compound of carbon with some other element or radical, in which the carbon plays the part of a negative; formerly termed {carburet}. [1913 Webster] …   The Collaborative International Dictionary of English

  • Carbide — Carbide. См. Карбид. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • carbide — compound formed by combination of carbon and another element, 1848, from carb , comb. form of CARBON (Cf. carbon) + chemical suffix IDE (Cf. ide). The earlier word was carburet …   Etymology dictionary

  • carbide — ► NOUN Chemistry ▪ a compound of carbon with a metal or other element …   English terms dictionary

  • Carbide.c++ — infobox software name = Carbide.c++ developer = Nokia latest release version = 1.3.2 operating system = Microsoft Windows platform = Symbian OS genre = Compiler license = Node locked license / floating license website =… …   Wikipedia

  • Carbide — For the software development tool targeting the Symbian OS, see Carbide.c++. Calcium carbide. In chemistry, a carbide is a compound composed of carbon and a less electronegative element. Carbides can be generally classified by chemical bonding… …   Wikipedia

  • Carbide — Calciumcarbid Carbide sind eine Stoffgruppe binärer chemischer Verbindungen aus einem Element E und Kohlenstoff C mit der allgemeinen Formel ExCy. Inhaltsverzeichnis 1 …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”