amine


amine
aminic /euh mee"nik, euh min"ik/, adj.aminity /euh min"i tee/, n.
/euh meen", am"in/, n. Chem.
any of a class of compounds derived from ammonia by replacement of one or more hydrogen atoms with organic groups.
[1860-65; AM(MONIUM) + -INE2]

* * *

Any of a class of nitrogen-containing organic compounds derived, either in principle or in practice, from ammonia (NH3).

Almost all their chemical names end in -ine. Replacement of one, two, or all three of the hydrogen atoms in ammonia with organic groups yields primary, secondary, or tertiary amines, respectively. Addition of a fourth hydrogen with an accompanying positive charge on the nitrogen atom results in a quaternary amine. Naturally occurring amines include alkaloids, present in certain plants; some neurotransmitters, including dopamine and epinephrine; and histamine. Industrially important amines include aniline, ethanolamine, and others, used in making rubber, dyes, pharmaceuticals, and synthetic resins and fibres and in a host of other applications. A nitrogen atom with one or two hydrogens is often referred to as an amino group.

* * *

Introduction
 any member of a family of nitrogen-containing organic compounds (organic compound) that is derived, either in principle or in practice, from ammonia (NH3).

      Naturally occurring amines include the alkaloids (alkaloid), which are present in certain plants; the catecholamine neurotransmitters (neurotransmitter) (i.e., dopamine, epinephrine, and norepinephrine (epinephrine and norepinephrine)); and a local chemical mediator, histamine, that occurs in most animal tissues.

       aniline, ethanolamines (ethanolamine), and several other amines are major industrial commodities used in making rubber, dyes (dye), pharmaceuticals (pharmaceutical), and synthetic resins (resin) and fibres (fibre) and for a host of other applications. Most of the numerous methods for the preparation of amines may be broadly divided into two groups: (1) chemical (chemical reaction) reduction (replacement of oxygen with hydrogen atoms in the molecule) of members of several other classes of organic nitrogen compounds and (2) reactions of ammonia or amines with organic compounds.

      Amines are classified as primary, secondary, or tertiary depending on whether one, two, or three of the hydrogen atoms of ammonia have been replaced by organic groups. In chemical notation these three classes are represented as RNH2, R2NH, and R3N, respectively. A fourth category consists of quaternary ammonium compounds, which are obtained by replacement of all four hydrogen atoms of the ammonium ion, NH4+; an anion is necessarily associated (R4N+X). Amines are also classified as aliphatic (aliphatic compound), having only aliphatic groups attached, or aromatic, having one or more aryl groups attached. They may be open-chain, in which the nitrogen is not part of a ring, or cyclic, in which it is a member of a ring (generally aliphatic).

nomenclature of amines
      The older and most widely used system for naming amines is to identify each group that is attached to the nitrogen atom and then add the ending -amine, as in methylamine, CH3NH2; N-ethyl-N-propylamine (or ethyl(propyl)amine), CH3CH2NHCH2CH2CH3; and tributylamine, (CH3CH2CH2CH2)3N. Two or more groups cited are in alphabetical order; to clarify which groups are attached to nitrogen rather than to each other, Ns or internal parentheses are used. A few aromatic amines and most cyclic amines have trivial (nonsystematic) names (e.g., aniline, C6H5NH2), which may be used as a parent (basic structural unit) on which to specify any other groups attached, as in N,N-dimethylaniline.

      An alternative method replaces the terminal -e of a hydrocarbon name by the suffix -amine to indicate the functional group −NH2. With secondary and tertiary amines, the largest group is chosen as the parent, and the other groups are named as substituents. The names in this system for the previous examples are methanamine, N-ethylpropanamine, and N,N-dibutylbutanamine. Dimethylaniline is named N,N-dimethylbenzenamine. When another functional group of the compound has a higher priority than the amino group (−NH2, −NHR, or −NR2), the latter is named as a substituent, as in aminoacetic acid, NH2−CH2COOH, and 2-(dimethylamino)ethanol, (CH3)2N−CH2CH2OH. (The simple guidelines given here may not be adequate for more-complex structures.)

Properties of amines

Physical properties
       Properties of some aminesDistinctive odours that are fishy to putrid characterize the lower-molecular-weight amines. They are gases (gas) at room temperature or are easily vaporized liquids (liquid). Aliphatic amines are less dense than water, having densities in the range 0.63 to 0.74 gram per cubic cm; aromatic amines are typically slightly heavier than water (e.g., the density of aniline is 1.02 grams per cubic cm). With increasing size, they become less volatile; the odour decreases and eventually becomes unnoticeable, although some diamines have offensive odours. For example, H2N(CH2)4NH2, called putrescine, and H2N(CH2)5NH2, called cadaverine, are foul-smelling compounds found in decaying flesh. Amines are colourless; aliphatic amines are transparent to ultraviolet light, but aromatic amines display strong absorption of certain wavelengths. Amines with fewer than six carbons (carbon) mix with water in all proportions. The aliphatic amines are stronger bases than ammonia, and the aromatic ones are substantially weaker. The basicity is measured in terms of the pKb value, which is equal to −logKb, where Kb is the equilibrium constant for the reaction B + H3O+ ⇌ BH+ + H2O (B is the amine). Thus, a larger pKb value indicates greater strength as a base. For comparison, the pKb of ammonia is 4.75. Quaternary ammonium hydroxides are very strong bases, but the chlorides are not basic. Properties of some amines

      Most aliphatic amines are not highly toxic, and many are harmless, natural components of foods and pharmaceuticals (pharmaceutical). In high concentrations, however, the smaller amines are highly irritating to the skin and especially to the mucous membranes of the eyes, nose, throat, and lungs, to which they can cause acute damage upon prolonged exposure. Larger amines (12 or more carbon atoms) are usually less irritating. Aromatic amines are also irritants and can be absorbed through the skin. They may be dangerous poisons. Aniline, for example, destroys the hemoglobin of blood, and prolonged exposure has been linked with cancer. Amines can be corrosive to some metals (metal) and plastics (plastic); they should therefore be stored in glass or steel containers.

Molecular shape and configuration
 An amine molecule has the shape of a somewhat flattened triangular pyramid, with the nitrogen atom at the apex. An unshared electron pair is localized above the nitrogen atom. In quaternary ammonium ions this region is occupied by a substituent, forming a nearly regular tetrahedron with the nitrogen atom at its centre.

      Left-handed and right-handed forms (mirror-image configurations, known as optical isomers or enantiomers (enantiomorph)) are possible when all the substituents on the central nitrogen atom are different (i.e., the nitrogen is chiral). With amines, there is extremely rapid inversion in which the two configurations are interconverted. The process is like an umbrella turning inside out in the wind; the substituents move in one direction (“up”) and the nitrogen atom in the other (“down”). Quaternary ammonium ions do not undergo such equilibration short of conditions where they decompose; their optical isomers are indefinitely stable and isolable, and the physiological effects of the two enantiomers may be profoundly different.

Occurrence and sources of amines
      Aliphatic amines occur in nature, principally as products of the putrefaction of protein material, but they are also present in living tissue (e.g., histamine, a cyclic aliphatic amine). The methylamines occur in small amounts in some plants. Many polyfunctional amines (i.e., those having other functional groups in the molecule) occur as alkaloids (alkaloid) in plants—for example, mescaline, 2-(3,4,5-trimethoxyphenyl)ethylamine; the cyclic amines nicotine, atropine, morphine, and cocaine; and the quaternary salt choline, N-(2-hydroxyethyl)trimethylammonium chloride, which is present in nerve synapses (synapse) and in plant and animal cells (cell).

      Large quantities of aliphatic amines are made synthetically. The most widely used industrial method is the reaction of alcohols (alcohol) with ammonia at a high temperature, catalyzed by metals or metal oxide catalysts (catalyst) (e.g., nickel or copper). Mixtures of primary, secondary, and tertiary amines are thereby produced. Some amines—such as hexamethylenediamine, used in the manufacture of nylon-6,6—are made by catalytic addition of hydrogen to nitriles (nitrile), R≡CN.

       aniline and some other aromatic amines were at one time obtained from coal tar but are today synthesized from benzene, C6H6, or other hydrocarbons. Benzene is first converted to nitrobenzene (C6H5NO2) or chlorobenzene (C6H5Cl). The former is reduced to aniline by treatment with hydrogen over a catalyst or by means of other reagents, such as iron or hydrogen sulfide (Fe and H2S, respectively). Aniline is made from chlorobenzene by treatment with ammonia at a high temperature in the presence of copper compounds.

      On a smaller scale, such as in the pharmaceutical industry or the research laboratory, the foregoing methods may not be suitable because of the engineering costs and the formation of a mixture of products. For the synthesis of single products and small-scale operations, other reactions are available. The reaction of alkyl halides, R−X, where X is a halogen (halogen element), or analogous reagents with ammonia (or amines) is useful with certain compounds. A mixture of mono-, di-, and trialkylated amines, and sometimes also the quaternary ammonium salt, often results:

      RCH2X + NH3

      RCH2NH2, (RCH2)2NH, (RCH2)3N, (RCH2)4N+X

      Not all alkyl halides are effective reagents; the reaction is sluggish with secondary alkyl groups and fails with tertiary ones. Its usefulness is largely confined to primary alkyl halides (those having two hydrogen atoms on the reacting site). To avoid the problem of multiple alkylation, methods have been devised for “blocking” substitution so that only one alkyl group is introduced. The Gabriel synthesis is one such method; it utilizes phthalimide, C6H4(CO)2NH, whose one acidic hydrogen atom has been removed upon the addition of a base such as KOH to form a salt.

      Although phthalimide itself is not reactive, its anion will react with alkyl halides, but only once. hydrolysis of the resulting alkylphthalimide releases the primary amine.

      Primary amines having a tertiary alkyl group (R3CNH2) are difficult to prepare with most methods but are made industrially by the Ritter reaction. In this method a tertiary alcohol reacts with hydrogen cyanide (HCN) in the presence of a concentrated strong acid; a formamide, RNH−CHO, is formed first, which then undergoes hydrolysis.

      Reaction of ammonia with alkenes (olefin) at high temperatures and pressure, catalyzed by zeolites (zeolite), is also employed industrially.

      Reduction of nitro compounds (nitro compound), RNO2, by hydrogen or other reducing agents produces primary amines cleanly (i.e., without a mixture of products), but the method is mostly used for aromatic amines because of the limited availability of aliphatic nitro compounds. Reduction of nitriles and oximes (oxime) (R2C=NOH) also yields primary amines. Imines, R2C=NR′, may be used to prepare secondary amines, commonly in a process in which the imine is formed from a primary amine and an aldehyde or ketone and then reduced by hydrogen and a nickel catalyst. Amides (amide), RCONR′2, can be reduced to amines by lithium aluminum hydride (LiAlH4), which replaces the oxygen with two hydrogens. If there is no substituent on the nitrogen (i.e., R′ = H), a primary amine results. When one or both R′ groups are not hydrogen, secondary or tertiary amines, respectively, are produced.

      Prominent among rearrangement reactions is the Hofmann reaction, in which an amide is treated with chlorine or bromine and an aqueous alkali (base).

      A series of steps takes place quickly. In an intermediate step, an R group moves from the carbonyl (carbonyl group) carbon to the nitrogen, displacing the halogen ion; the final step, the loss of a CO32− group, leads to a primary amine of one less carbon atom (i.e., RCONH2 becomes RNH2). The Beckmann rearrangement, by which a ketoxime, R2C=NOH, is rearranged to an amide, RCONHR, can be used to prepare primary amines when followed by hydrolysis.

      Tertiary amines are typically made by direct alkylation of secondary amines by alkyl halides:

      Alternatives are reduction of disubstituted amides or reduction of a mixture of a secondary amine and an aldehyde by formic acid (known as the Leuckart reaction):

      R2NH + R2C=O + HCOOH → R2N−CHR2+ CO2

Reactions of amines

      Amines characteristically form salts (salt) with acids; a hydrogen ion, H+, adds to the nitrogen. With the strong mineral acids (e.g., H2SO4, HNO3, and HCl), the reaction is vigorous. Salt formation is instantly reversed by strong bases such as NaOH. Neutral electrophiles (electrophile) (compounds attracted to regions of negative charge) also react with amines; alkyl halides (R′X) and analogous alkylating agents are important examples of electrophilic reagents. A salt is formed by addition; R3N becomes R3NR′+X.

      RNH2+ R′X → RR′N+H2X→ RNH2RR′NH + RN+H3X

      Although tertiary amines do not react with aldehydes and ketones, and secondary amines react only reversibly, primary amines react readily to form imines (also called azomethines or Schiff bases), R2C=NR′.

Substitution (substitution reaction)
      Acylation is one of the most important reactions of primary and secondary amines; a hydrogen atom is replaced by an acyl group (a group derived from an acid, such as RCOOH or RSO3H, by removal of −OH, such as RC(=O)−, RS(O)2−, and so on). Reagents may be acid chlorides (RCOC1, RSO2C1), anhydrides (anhydride) ((RCO)2O), or even esters (ester) (RCOOR′); the products are amides of the corresponding acids.

      The reaction with phosgene, COC12 (the acid chloride of carbonic acid, H2CO3), has major industrial importance. It can result in simple acylation to form ureas (urea) (amides of carbonic acid), RNHCONHR, but it is usually carried out under conditions that favour the conversion of primary amines to isocyanates: RNH2+ COCl2→ RN=C=O + 2HCl). Isocyanates are themselves acylating agents, of a type that also includes isothiocyanates (RN=C=S), ketenes (ketene) (R2C=C=O), and carbon dioxide (O=C=O). They react more or less readily with primary and most secondary amines to form, respectively, ureas, thioureas (thiourea) (RNHCSNHR), amides, and salts of carbamic acid (RNHCO2RNH3+).

      Reaction with nitrous acid (HNO2), which functions as an acylating agent that is a source of the nitrosyl group (−NO), converts aliphatic primary amines to nitrogen and mixtures of alkenes and alcohols corresponding to the alkyl group in a complex process.

      R2CH−CR2−NH2+ HNO2→ R2CH−CR2NHNO →

      N2 + R2C=CR2 or R2CH−CR2OH

      This reaction has been used for analytical determination of primary amino groups in a procedure known as the Van Slyke method. With aromatic primary amines, nitrogen is not lost if the reaction mixture is kept cool (usually 0 °C [32 °F]), and a diazonium salt, ArN2+X, where Ar is an aryl group, is formed:

      ArNH2 + HNO2 + HX → ArN2+X

      These highly reactive compounds are of great importance in organic synthesis and in the dye industry (see dyes (dye)).

      Nitrous acid converts secondary amines (aliphatic or aromatic) to N-nitroso compounds (nitrosamines): R2NH + HNO2 → R2N−NO. Some nitrosamines are potent cancer-inducing substances, and their possible formation is a serious consideration when nitrites (nitrite), which are salts of nitrous acid, are present in foods or pharmaceutical preparations. Tertiary amines give rise to nitrosamines more slowly; an alkyl group is eliminated as an aldehyde or ketone, along with nitrous oxide, N2O.

      Halogenation, in which one or more hydrogen atoms of an amine is replaced by a halogen atom, occurs with chlorine, bromine, and iodine, as well as with some other reagents, notably hypochlorous acid (HClO). With primary amines the reaction proceeds in two stages, producing N-chloro- and N,N-dichloro-amines, RNHCl and RNCl2, respectively. With tertiary amines, an alkyl group may be displaced by a halogen.

Oxidation
      Amines can burn in air, producing water, carbon dioxide, and either nitrogen or its oxides. Milder oxidation, using reagents such as NaOCl, can remove four hydrogen atoms from primary amines of the type RCH2NH2 to form nitriles (nitrile) (R−C≡N), and oxidation with reagents such as MnO2 can remove two hydrogen atoms from secondary amines (R2CH−NHR′) to form imines (R2C=NR′). Tertiary amines can be oxidized to enamines (R2C=CHNR2) by a variety of reagents.

      R2CH−CH2NR′2 + Hg(OAc)2 → R2C=CH−NR′2

       hydrogen peroxide (H2O2) and peroxy acids (peroxy acid) generally add an oxygen atom to the nitrogen of amines. With primary amines, this step is normally followed by further oxidation, leading to nitroso compounds (nitroso compound), RNO, or nitro compounds (nitro compound), RNO2. Secondary amines are converted to hydroxylamines (hydroxylamine), R2NOH, and tertiary amines to amine oxides, R3NO.

Elimination (elimination reaction)
      The principal reaction of quaternary ammonium compounds is the Hofmann degradation, which takes place when the hydroxides are strongly heated, generating a tertiary amine; the least-substituted alkyl group is lost as an alkene.

Uses of amines
      Examples of direct uses of amines and their salts are as corrosion inhibitors in boilers and in lubricating oils (morpholine), as antioxidants (antioxidant) for rubber and roofing asphalt (diarylamines), as stabilizers for cellulose nitrate explosives (explosive) (diphenylamine), as protectants against damage from gamma radiation (diarylamines), as developers in photography (aromatic diamines), as flotation agents in mining, as anticling and waterproofing agents for textiles (textile), as fabric softeners, in paper coating, and for solubilizing herbicides (herbicide). Some polyfunctional amines are valuable pharmaceuticals, such as ephedrine and epinephrine (epinephrine and norepinephrine) (adrenaline), and anesthetics (anesthetic), such as novocaine.

      Many important products require amines as part of their syntheses. Methylamine is utilized in the production of the analgesic meperidine (trade name Demerol) and the photographic developer Metol (trademark), and dimethylamine is used in the synthesis of the antihistamine diphenhydramine (trade name Benadryl), the solvent dimethylformamide (DMF), and the rocket propellant 1,1-dimethylhydrazine. The synthesis of the insect repellent N,N-diethyl-m-toluamide (DEET) incorporates diethylamine while that of the synthetic fibre Kevlar requires aromatic amines. Polyurethanes (polyurethane) are formed from methylenedianiline via its diisocyanate. Other products utilizing amines in their synthesis include spandex, caffeine, explosives (e.g., 2,3,4,6-tetranitro-N-methylaniline [TNA] and 2,4,6-N-tetranitroaniline [Tetryl]), pesticides (pesticide), fungicides (fungicide), herbicides (herbicide), azo dyes (azo dye), and some triphenylmethane dyes (triphenylmethane dye).

Peter A.S. Smith Eric Block

Additional Reading
Stephen A. Lawrence, Amines: Synthesis, Properties and Applications (2004), treats most practical aspects of amine chemistry. Derek Barton and W. David Ollis (eds.), Comprehensive Organic Chemistry, vol. 2, Nitrogen Compounds, Carboxylic Acids, Phosphorus Compounds, ed. by I.O. Sutherland (1979), contains a comprehensive section on amines at an intermediate level. Advanced chapters on most fundamental features of amine chemistry may be found in Saul Patai, The Chemistry of Amino, Nitroso, Nitro, and Related Groups (1996). Barry M. Trost and Ian Fleming (eds.), Comprehensive Organic Synthesis, vol. 6, Heteroatom Manipulation (1991), chapter 1, includes a substantial section on synthesis of amines and ammonium salts at an intermediate-to-advanced level.Peter A.S. Smith

* * *


Universalium. 2010.

Look at other dictionaries:

  • amine — [ amin ] n. f. • 1865; du rad. de ammoniac ♦ Tout composé obtenu par substitution de radicaux hydrocarbonés univalents à l hydrogène de l ammoniac. Amines de réveil. ⇒ amphétamine. En appos. Fonction amine ( NH2). ● amine nom féminin Cotte de… …   Encyclopédie Universelle

  • aminé — amine [ amin ] n. f. • 1865; du rad. de ammoniac ♦ Tout composé obtenu par substitution de radicaux hydrocarbonés univalents à l hydrogène de l ammoniac. Amines de réveil. ⇒ amphétamine. En appos. Fonction amine ( NH2). ● amine nom féminin Cotte… …   Encyclopédie Universelle

  • Amine —   [Kurzwort], Singular Amin das, s, organische Verbindungen, die sich formal vom Ammoniak (NH3) ableiten, indem dessen Wasserstoffatome durch Alkyl (aliphatische oder Alkylamine) oder Arylgruppen (aromatische oder Arylamine) ersetzt werden. Je… …   Universal-Lexikon

  • Amine — Am ine (?; 277), n. [Ammonia + ine.] (Org. Chem.) One of a class of basic substances derived from ammonia by replacement of one or more hydrogen atoms by an alkyl or aryl group. Compare {amide}, in which an acyl group is attached to the nitrogen …   The Collaborative International Dictionary of English

  • Amine — Amīne, Aminbasen,, s. Ammoniakbasen …   Kleines Konversations-Lexikon

  • Amine — Amine, organische Verbindungen, in denen ein, zwei oder drei H Atome des Ammoniaks (NH3) durch Kohlenwasserstoffreste ersetzt sind. Die Unterscheidung in primäre, sekundäre und tertiäre A. erfolgt nach der Anzahl der substituierten H Atome. In… …   Deutsch wörterbuch der biologie

  • aminé — calaminé contaminé décontaminé examiné foraminé laminé réexaminé staminé vitaminé …   Dictionnaire des rimes

  • amine — (n.) compound in which one of the hydrogen atoms of ammonia is replaced by a hydrocarbon radical, 1863, from AMMONIA (Cf. ammonia) + chemical suffix INE (Cf. ine) (2) …   Etymology dictionary

  • amine — ► NOUN Chemistry ▪ an organic compound derived from ammonia by replacement of one or more hydrogen atoms by organic radicals …   English terms dictionary

  • amine — [ə mēn′; am′ēn΄, am′in] n. [ AM(MONIA) + INE3] Chem. a derivative of ammonia in which hydrogen atoms have been replaced by nonacidic radicals containing hydrogen and carbon atoms (e.g., methylamine, CH3NH2) aminic [əmin′ik, əmēn′ik] adj …   English World dictionary

  • Amine — Als Amine bezeichnet man organische Abkömmlinge (Derivate) des Ammoniaks (NH3), bei dem ein oder mehrere Wasserstoffatome durch Alkyl oder Arylgruppen ersetzt sind. Inhaltsverzeichnis 1 Systematik der Amine 2 Eigenschaften 2.1 …   Deutsch Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.