acetylene

—acetylenic /euh set'l en"ik/, adj.

/euh set"l een', -in/, n. Chem.

a colorless gas, C₂H₂, having an etherlike odor, produced usually by the action of water on calcium carbide or by pyrolysis of natural gas: used esp. in metal cutting and welding, as an illuminant, and in organic synthesis. Also called ethine, ethyne.

[1860-65; ACETYL + -ENE]

* * *

or ethyne

Simplest alkyne, C₂H₂.

A colourless, flammable, explosive gas, it is used as a fuel in welding and cutting metals and as a raw material for many organic compounds and plastics. It is produced by reaction of water with calcium carbide, passage of a hydrocarbon through an electric arc, or partial combustion of methane. Decomposing it liberates heat; depending on degree of purity, it is also an explosive. An acetylene torch reaches about 6,000 °F (3,300 °C), hotter than combustion of any other known gas mixture. See also hydrocarbon.

* * *

▪ chemical compound

also called  Ethyne, 

      the simplest and best-known member of the hydrocarbon series containing one or more pairs of carbon atoms linked by triple bonds, called the acetylenic series, or alkynes. It is a colourless, inflammable gas widely used as a fuel in oxyacetylene welding and cutting of metals and as raw material in the synthesis of many organic chemicals and plastics; its chemical formula is C₂H₂.

      Pure acetylene is a colourless gas with a pleasant odour; as prepared from calcium carbide it usually contains traces of phosphine that cause an unpleasant garliclike odour. Acetylene can be decomposed to its elements with the liberation of heat. The decomposition may or may not give rise to explosion, depending on conditions. Pure acetylene under pressure in excess of about 15 pounds per square inch or in liquid or solid form explodes with extreme violence.

      Mixtures of air and acetylene are explosive over a wide range, from about 2.5 percent air in acetylene to about 12.5 percent acetylene in air. When burned with the correct amount of air, acetylene gives a pure, white light, and for this reason it was at one time used for illumination in locations where electric power was not available, e.g., buoys, miners' lamps, and road signals. The combustion of acetylene produces a large amount of heat, and, in a properly designed torch, the oxyacetylene flame attains the highest flame temperature (about 6,000° F, or 3,300° C) of any known mixture of combustible gases.

      The hydrogen atoms in acetylene can be replaced by metallic elements to form acetylides—e.g., acetylides of silver, copper, or sodium. The acetylides of silver, copper, mercury, and gold are detonated by heat, friction, or shock. In addition to its reactive hydrogen atom, the carbon–carbon triple bond can readily add halogens, halogen acids, hydrogen cyanide, alcohols, amines, and amides. Acetylene can also add to itself or to aldehydes and ketones. Many of the reactions mentioned here are used for the commercial manufacture of various industrial and consumer products, such as acetaldehyde, the synthetic rubber neoprene, water-base paints, vinyl fabric and floor coverings, dry-cleaning solvents, and aerosol insecticide sprays. Acetylene is produced by any of three methods: by reaction of water with calcium carbide, by passage of a hydrocarbon through an electric arc, or by partial combustion of methane with air or oxygen.

* * *