microelectromechanical system

microelectromechanical system

      mechanical parts and electronic circuits combined to form miniature devices, typically on a semiconductor chip, with dimensions from tens of micrometres to a few hundred micrometres (millionths of a metre). Common applications for MEMS include sensors, actuators, and process-control units.

      Interest in creating MEMS grew in the 1980s, but it took nearly two decades to establish the design and manufacturing infrastructure needed for their commercial development. One of the first products with a large market was the automobile air-bag controller, which combines inertia sensors to detect a crash and electronic control circuitry to deploy the air bag in response. Another early application for MEMS was in inkjet printheads. In the late 1990s, following decades of research, a new type of electronic projector was marketed that employed millions of micromirrors, each with its own electronic tilt control, to convert digital signals into images that rival the best traditional television displays. Emerging products include mirror arrays for optical switching in telecommunications, semiconductor chips with integrated mechanical oscillators for radio-frequency applications (such as cellular telephones), and a broad range of biochemical sensors for use in manufacturing, medicine, and security.

      MEMS are fabricated by using the processing tools and materials employed in integrated-circuit (integrated circuit) (IC) manufacturing. Typically, layers of polycrystalline silicon are deposited along with so-called sacrificial layers of silicon dioxide or other materials. The layers are patterned and etched before the sacrificial layers are dissolved to reveal three-dimensional structures, including microscopic cantilevers, chambers, nozzles, wheels, gears, and mirrors. By building these structures with the same batch-processing methods used in IC manufacturing, with many MEMS on a single silicon wafer, significant economies of scale have been achieved. Also, the MEMS components are in essence “built in place,” with no subsequent assembly required, in contrast to the manufacture of conventional mechanical devices.

      A technical issue in MEMS fabrication concerns the order in which to build the electronic and mechanical components. High-temperature annealing is needed to relieve stress and warping of the polycrystalline-silicon layers, but it can damage any electronic circuits that have already been added. On the other hand, building the mechanical components first requires protecting these parts while the electronic circuitry is fabricated. Various solutions have been used, including burying the mechanical parts in shallow trenches prior to the electronics fabrication and then uncovering them afterward.

      Barriers to further commercial penetration of MEMS include their cost compared with the cost of simpler technologies, nonstandardization of design and modeling tools, and the need for more reliable packaging. A current research focus is on exploring properties at nanometre (nanotechnology) dimensions (i.e., at billionths of a metre) for devices known as nanoelectromechanical systems (NEMS). At these scales the frequency of oscillation for structures increases (from megahertz up to gigahertz frequencies), offering new design possibilities (such as for noise filters); however, the devices become increasingly sensitive to any defects arising from their fabrication.

S. Tom Picraux
 

* * *


Universalium. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Microelectromechanical system oscillator — Microelectromechanical system (MEMS) oscillators are timing devices that generate highly stable reference frequencies. These reference frequencies are used to sequence electronic systems, manage data transfer, define radio frequencies, and… …   Wikipedia

  • microelectromechanical system (MEMS) — Miniature devices formed by combining mechanical parts and electronic circuits, typically on a semiconductor chip, with dimensions from tens to a few hundred micrometres (millionths of a metre). Common applications for MEMS include sensors,… …   Universalium

  • system — systemless, adj. /sis teuhm/, n. 1. an assemblage or combination of things or parts forming a complex or unitary whole: a mountain system; a railroad system. 2. any assemblage or set of correlated members: a system of currency; a system of… …   Universalium

  • Microelectromechanical systems — (MEMS) (also written as micro electro mechanical, MicroElectroMechanical or microelectronic and microelectromechanical systems) is the technology of very small mechanical devices driven by electricity; it merges at the nano scale into… …   Wikipedia

  • microelectromechanical — adjective Describing any very small electromechanical system or device that is larger than a nanoelectromechanical one …   Wiktionary

  • Inertial navigation system — An Inertial Navigation System (INS) is a navigation aid that uses a computer and motion sensors to continuously track the position, orientation, and velocity (direction and speed of movement) of a vehicle without the need for external references …   Wikipedia

  • Nanoelectromechanical system — Part of a series of articles on Nanoelectronics Single molecule electronics …   Wikipedia

  • nanotechnology — /nan euh tek nol euh jee, nay neuh /, n. any technology on the scale of nanometers. [1987] * * * Manipulation of atoms, molecules, and materials to form structures on the scale of nanometres (billionths of a metre). These nanostructures typically …   Universalium

  • Casimir effect — Casimir forces on parallel plates Casimir forces on parallel pl …   Wikipedia

  • Embedded Software — Der Begriff Embedded Software Engineering setzt sich zusammen aus den Begriffen Embedded Systems (dt. „eingebettete Systeme“) und Software Engineering, (dt. „Softwaretechnik“). Ein eingebettetes System ist ein binärwertiges digitales System… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”