servomechanism

servomechanism
servomechanical /serr'voh meuh kan"i keuhl/, adj.servomechanically, adv.
/serr"voh mek'euh niz'euhm, serr'voh mek"-/, n.
an electronic control system in which a hydraulic, pneumatic, or other type of controlling mechanism is actuated and controlled by a low-energy signal.
[1940-45; SERVO- + MECHANISM]

* * *

Device used to correct the performance of a mechanism automatically, by means of error-sensing feedback.

The term properly applies only to systems in which the feedback and error-correction signals control mechanical position or velocity. Servomechanisms were first used in military and marine navigation equipment. Today they are used in automatic machine tools, satellite-tracking antennas, celestial-tracking systems on telescopes, automatic navigation systems, and antiaircraft-gun control systems. The design of servomechanisms is considered to be a branch of both robotics and cybernetics.

* * *

      automatic device used to correct the performance of a mechanism by means of an error-sensing feedback. The term servomechanism properly applies only to systems in which the feedback and error-correction signals control mechanical position or one of its derivatives such as velocity or acceleration. Servomechanisms were first used in gunlaying (aiming) and in fire-control and marine-navigation equipment. Today, applications of servomechanisms include their use in automatic machine tools, satellite-tracking antennas, celestial-tracking systems on telescopes, automatic navigation systems, and antiaircraft-gun control systems.

      In many applications, servomechanisms allow high-powered devices to be controlled by signals from devices of much lower power. The operation of the high-powered device results from a signal (called the error, or difference, signal) generated from a comparison of the desired position of the high-powered device with its actual position. The ratio between the power of the control signal and that of the device controlled can be on the order of billions to one.

      All servomechanisms have at least these basic components: a controlled device, a command device, an error detector, an error-signal amplifier, and a device to perform any necessary error corrections (the servomotor). In the controlled device, that which is being regulated is usually position. This device must, therefore, have some means of generating a signal (such as a voltage), called the feedback signal, that represents its current position. This signal is sent to an error-detecting device. The command device receives information, usually from outside the system, that represents the desired position of the controlled device. This information is converted to a form usable by the system (such as a voltage) and is fed to the same error detector as is the signal from the controlled device. The error detector compares the feedback signal (representing actual position) with the command signal (representing desired position). Any discrepancy results in an error signal that represents the correction necessary to bring the controlled device to its desired position. The error-correction signal is sent to an amplifier, and the amplified voltage is used to drive the servomotor, which repositions the controlled device.

      A typical system using a servomechanism is the communications-satellite–tracking antenna of a satellite Earth station. The objective is to keep the antenna aimed directly at the communications satellite in order to receive and transmit the strongest possible signal. One method used to accomplish this is to compare the signals from the satellite as received by two or more closely positioned receiving elements on the antenna. Any difference in the strengths of the signals received by these elements results in a correction signal being sent to the antenna servomotor. This continuous feedback method allows a terrestrial antenna to be aimed at a satellite 37,007 km (23,000 miles) above the Earth to an accuracy measured in hundredths of a centimetre.

* * *


Universalium. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Servomechanism — Ser vo*mech an*ism, n. an electronically controlled mechanical or hydraulic device permitting a large action or strong forces to be controlled by a small electrical signal. [PJC] …   The Collaborative International Dictionary of English

  • servomechanism — ► NOUN ▪ a powered mechanism producing motion or forces at a higher level of energy than the input level, e.g. in the brakes and steering of large motor vehicles …   English terms dictionary

  • servomechanism — [sʉr΄vō mek′ə niz΄əm] n. [< SERVOMOTOR + MECHANISM] an automatic control system in which the output is constantly or intermittently compared with the input through feedback so that the error or difference between the two quantities can be used …   English World dictionary

  • Servomechanism — [ thumb|right|200px|Industrial servomotor The grey/green cylinder is the brush type DC motor. The black section at the bottom contains the planetary reduction gear, and the black object atop the motor is the optical encoder for position feedback …   Wikipedia

  • servomechanism — A type of control system in which a small signal or a small force is used to control a much larger force and in which output accurately follows the input even if it is varying rapidly. The system constantly compares the input and the output until …   Aviation dictionary

  • servomechanism — sekimo mechanizmas statusas T sritis automatika atitikmenys: angl. servomechanism vok. Folgemechanismus, m; Folgewerk, n; Nachlaufsteuerung, f; Nachlaufwerk, n rus. следящий механизм, m pranc. dispositif d asservissement, m …   Automatikos terminų žodynas

  • servomechanism — vykdiklis statusas T sritis automatika atitikmenys: angl. servodrive; servogear; servomechanism vok. Servomechanismus, m; Stellantrieb, m rus. исполнительный механизм, m; сервомеханизм, m; сервопривод, m pranc. mécanisme d asservissement, m;… …   Automatikos terminų žodynas

  • servomechanism — valdomasis mechanizmas statusas T sritis automatika atitikmenys: angl. servomechanism vok. Servomechanismus, m rus. сервомеханизм, m pranc. servomécanisme, m …   Automatikos terminų žodynas

  • servomechanism — vykdymo mechanizmas statusas T sritis automatika atitikmenys: angl. final controlling drive; servogear; servomechanism vok. Stellantrieb, m rus. исполнительный механизм, m; сервомеханизм, m pranc. mécanisme exécutif, m …   Automatikos terminų žodynas

  • servomechanism — noun Etymology: servo (as in servomotor) + mechanism Date: 1926 an automatic device for controlling large amounts of power by means of very small amounts of power and automatically correcting the performance of a mechanism …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”