road


road
roadless, adj.roadlessness, n.
/rohd/, n.
1. a long, narrow stretch with a smoothed or paved surface, made for traveling by motor vehicle, carriage, etc., between two or more points; street or highway.
2. a way or course: the road to peace.
3. a railroad.
4. Often, roads. Also called roadstead. Naut. a partly sheltered area of water near a shore in which vessels may ride at anchor.
5. Mining. any tunnel in a mine used for hauling.
6. burn up the road, Slang. to drive or move very fast.
7. down the road, in the future: Economists see higher interest rates down the road.
8. hit the road, Slang. to begin or resume traveling: We hit the road before sunrise.
9. one for the road, a final alcoholic drink taken just before departing from a party, tavern, or the like.
a. traveling, esp. as a sales representative.
b. on tour, as a theatrical company: The musical ends its New York run next week to go on the road.
c. started; under way: We need funds to get the project on the road.
11. take to the road, to begin a journey or tour. Also, take the road.
12. the road, the places, usually outside of New York City, at which theatrical companies on tour generally give performances.
[bef. 900; ME rode, earlier rade, OE rad a riding, journey on horseback, akin to ridan to RIDE]

* * *

I
Traveled way on which people, animals, or wheeled vehicles move.

The earliest roads developed from paths and trails and appeared with the invention of wheeled vehicles, around 3000 BC. Road systems developed to facilitate trade in early civilizations; the first major road extended 1,775 mi (2,857 km) from the Persian Gulf to the Aegean Sea and was used с 3500–300 BC. The Romans used roads to maintain control of their empire, with over 53,000 mi (85,000 km) of roadways extending across its lands; Roman construction techniques and design remained the most advanced until the late 1700s. In the early 19th century invention of macadam road construction provided a quick and durable method for building roads, and asphalt and concrete also began to be used. Motorized traffic in the 20th century led to the limited-access highway, the first of which was a parkway in New York City (1925). Superhighways also appeared in Italy and Germany in the 1930s. In the 1950s the U.S. interstate highway system was inaugurated to link the country's major cities.
II
(as used in expressions)
Ledo Road

* * *

      the traveled way on which people, animals, or wheeled vehicles move. In modern usage the term road describes a rural, lesser traveled way, while the word street denotes an urban roadway. Highway refers to a major rural traveled way; more recently it has been used for a road, in either a rural or urban area, where points of entrance and exit for traffic are limited and controlled.

      A brief treatment of roads and highways follows. For further discussion, see roads and highways.

      The earliest roads developed from the paths and trails of prehistoric peoples; their construction was concurrent with the appearance of wheeled vehicles, which was probably in the area between the Caucasus Mountains and the Persian Gulf sometime before 3000 BC. Road systems were developed that connected the civilizations of Mesopotamia and Egypt and facilitated trade. The first major road was the Persian Royal Road, which extended from the Persian Gulf to the Aegean Sea over a distance of 1,775 miles (2,857 km) and was used from about 3500 to 300 BC. The “Amber Routes” were the earliest European roads and extended from Greece and Tuscany to the Baltic Sea. In East Asia the Chinese built a road system that linked its major cities and had a combined length of about 2,000 miles (3,200 km). The techniques used to build these early roads varied. In northern Europe, where wet land was often a problem, logs were laid on branches and then overlaid with transverse rows of logs to carry traffic over marshy areas. On the island of Malta ruts were carved in sandstone to hold carts on the roads. Civilizations around the Indus Valley built roads of brick cemented together with bitumen (an asphalt substance) and provided drains for water runoff. The Maurya Empire, one of the civilizations of this region, created a “ministry of public works” to keep its road system in good condition. The Romans (Roman road system) also recognized the importance of roads in maintaining an empire; at the empire's peak it had some 53,000 miles (85,000 km) of road, extending from Britain in the north to North Africa in the south and from the Atlantic coast of the Iberian peninsula in the west to the Persian Gulf in the east. (See also Roman road system. (Roman road system))

      The Romans were the first to construct roads scientifically. Their roads were characteristically straight, and the best ones were composed of a graded soil foundation that was topped by four courses (layers): a bedding of sand or mortar; rows of large, flat stones; a thin layer of gravel mixed with lime; and finally a thin wearing surface of flintlike lava. Roman roads varied in thickness from 3 to 5 feet (0.9 to 1.5 m), and their design remained the most sophisticated until the advent of modern road-building technology in the late 18th and early 19th centuries.

      As Rome declined its roads fell into disrepair, and, other than some interest in municipal street paving in the 15th and 16th centuries, there was little road-building activity in the West for more than 1,500 years. The Silk Road, which connected the Roman Empire with India and China, was used intermittently during this period (it was frequently closed owing to warfare and raids by nomads). In South America, however, the Incas were building a sophisticated network of well-planned roads through their empire in the Andes Mountains. By the 16th century, when the Spaniards arrived, the Incas had two long, parallel roads (one along the coast and the other in the mountains) with numerous cross connections.

      When interest in road building revived in Europe in the late 18th century, engineers began designing roads that incorporated lighter surfaces, relying on the subsurface for load support. Roads could thus be built relatively cheaply and quickly. The most influential of the early engineers was John Loudon McAdam (McAdam, John Loudon), inventor of the macadam road surface. His design comprised a compacted subgrade of crushed rock to support the load, and a surface covering of light stone to absorb wear and shed water to the drainage ditches.

      By the end of the 19th century the widespread use of the bicycle created a demand for roads with smoother surfaces. A pavement of natural rock asphalt was used in Paris as early as 1854, and portland cement concrete was used in Scotland in 1865. Road surfaces in the latter part of the century utilized a macadam construction. This process used a compacted stone base bound together with either a hydraulic (water-base) natural cement or a stone base impregnated with asphalt tar, called a tarmac surface.

      Two classifications of pavement (the hardened surface layer laid on top of a natural-earth or crushed-stone subgrade) have been developed: flexible and rigid. Flexible pavement is usually made of an asphalt–gravel aggregate that is laid in one or more courses over the subgrade. The aggregate can be mixed at the road-building site or at a central plant, and its quality varies with the production method used.

      A cheap method of pavement, called surface treatment, is made by spraying hot asphalt or tar on a compacted stone base and then placing small stone chips on the tar; it is suitable for lightly traveled roads and can be built up in layers. Pavements made with a high-temperature plant mix are suitable for the heaviest loads and are made by laying the asphalt while it is hot and rolling it before it cools. A flexible pavement has the advantage of being easy to build and repair; its asphalt binder is both waterproof and plastic, so that it resists water damage and can readily expand and contract with temperature variations.

      Rigid pavement, made of portland cement concrete, generally has greater strength but is susceptible to cracking. The cement, mixed with water and various grades of crushed stone called aggregate, is poured onto the built-up and graded foundation as a plastic mass. It shrinks as it dries, causing tensile stresses. The concrete also contracts and expands with temperature change, so that cracking is a constant problem. To remedy this, concrete sections are jointed, and grooves are cut part way through the slabs so that cracks will occur at regular intervals. Expansion is absorbed by transverse joints consisting of small openings with steel-rod dowels for reinforcement. The best solution so far has been by pouring a continuous concrete slab in which a mesh of steel bars is embedded. The bars, running lengthwise through the concrete, absorb the tension of shrinkage and hold shut any cracks that form.

      Modern highway design entails careful study of soil types, the topography of the intended route, and the drainage systems around the roadway. Where necessary, measures are taken to provide additional drainage facilities to prevent water from eroding the road base or freezing in cracks. The techniques of cutting and filling (excavating in one place and depositing it nearby to form a level roadbed) and switchbacking (zigzagging up a slope) have been used for centuries to obtain easy gradients in varied terrains. But it became necessary to design broad, banked curves to keep vehicles from leaving the roadway and to limit and control access to and egress from the highway, as well as to separate the lanes of traffic, in order to reduce the possibility of collisions.

      The prototype of the modern superhighway was the Bronx River Parkway, which was completed in 1925 in New York City. It was a limited-access, high-speed highway designed to carry a large volume of traffic without disturbing the natural landscape. In the 1920s the Italians began the autostrada, and the Germans followed not long after with the autobahn. Military use was an important design feature of these highways, which could accommodate heavy traffic at speeds of 100 miles (160 km) per hour. In the United States the federal government created the national Interstate Highway System after World War II. It incorporated the toll-road network with other limited-access highways and linked all of the nation's major cities. Most industrialized countries in the world built similar systems to facilitate automobile and truck traffic.

* * *


Universalium. 2010.

Synonyms:

Look at other dictionaries:

  • road — W1S1 [rəud US roud] n [: Old English; Origin: rad ride, journey ] 1.) [U and C] a specially prepared hard surface for cars, buses, bicycles etc to travel on →↑street, motorway ↑motorway, freeway ↑freeway ▪ I was driving along the road when a kid… …   Dictionary of contemporary English

  • road — [ roud ] noun count *** 1. ) a way that leads from one place to another, especially one with a hard surface that cars and other vehicles can use: He was driving on the wrong side of the road. A cat suddenly ran into the middle of the road. All… …   Usage of the words and phrases in modern English

  • Road to... — Road to... refers to a series of seven comedy films starring Bing Crosby, Bob Hope, and Dorothy Lamour. They are also often referred to as Road pictures. The movies were a combination of adventure, comedy, romance, and music. The minimal plot… …   Wikipedia

  • Road to... — Road to... Saltar a navegación, búsqueda Road to... es una serie de películas protagonizadas por Bob Hope, Bing Crosby y Dorothy Lamour. También son conocidas como Road Pictures. Sus tramas están llenas de aventuras, comedias, romance y musicales …   Wikipedia Español

  • Road — (r[=o]), n. [AS. r[=a]d a riding, that on which one rides or travels, a road, fr. r[=i]dan to ride. See {Ride}, and cf. {Raid}.] 1. A journey, or stage of a journey. [Obs.] [1913 Webster] With easy roads he came to Leicester. Shak. [1913 Webster] …   The Collaborative International Dictionary of English

  • road — ► NOUN 1) a wide way between places, especially one surfaced for use by vehicles. 2) a way to achieving a particular outcome. 3) a partly sheltered stretch of water near the shore in which ships can ride at anchor. ● down the road Cf. ↑down the… …   English terms dictionary

  • road — road, street 1. According to a law of Henry I of England (1100–35), a street was to be sufficiently broad for two loaded carts to meet and for sixteen armed knights to ride abreast. The history of road and street and of other terms such as lane,… …   Modern English usage

  • Road — kommt aus dem Englischen und bedeutet Straße, hauptsächlich werden Straßen außerorts oder am Stadtrand so bezeichnet. Außerdem sind einige Filme mit Road betitelt: Road (1987), britischer Spielfilm von Alan Clarke Road (2000), australischer… …   Deutsch Wikipedia

  • road — [rōd] n. [ME rode, a riding < OE rad, a ride, traveling on horseback, way; akin to ridan, to RIDE] 1. a way made for traveling between places, esp. distant places, by automobile, horseback, etc.; highway 2. a way; path; course [the road to… …   English World dictionary

  • road — (n.) O.E. rad riding, hostile incursion, from P.Gmc. *ridanan, source of O.E. ridan (see RIDE (Cf. ride)). Also related to RAID (Cf. raid). In Middle English, a riding, a journey; sense of open way for traveling between two places is first… …   Etymology dictionary

  • road up — Road surface being repaired • • • Main Entry: ↑road …   Useful english dictionary


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.