Map

Map
/map/, n.
Walter, c1140-1209?, Welsh ecclesiastic, poet, and satirist.
Also, Mapes /mayps, may"peez/.

* * *

I
Graphic representation, drawn to scale and usually on a flat surface, of features
usually geographic, geologic, or geopolitical
of an area of the Earth or of any celestial body.

Globes are maps represented on the surface of a sphere. Cartography is the art and science of making maps and charts. Major types of maps include topographic maps, showing features of the Earth's land surface; nautical charts, representing coastal and marine areas; hydrographic charts, which detail ocean depths and currents; and aeronautical charts, which detail surface features and air routes.
II
(as used in expressions)
four colour map problem

* * *

Introduction

      graphic representation, drawn to scale and usually on a flat surface, of features—for example, geographical, geological, or geopolitical—of an area of the Earth or of any other celestial body. Globes are maps represented on the surface of a sphere. Cartography is the art and science of making maps and charts.

      In order to imply the elements of accurate relationships, and some formal method of projecting the spherical subject to a map plane, further qualifications might be applied to the definition. The tedious and somewhat abstract statements resulting from attempts to formulate precise definitions of maps and charts are more likely to confuse than to clarify. The words map, chart, and plat are used somewhat interchangeably. The connotations of use, however, are distinctive: charts for navigation purposes (nautical and aeronautical), plats (in a property-boundary sense) for land-line references and ownership, and maps for general reference.

       cartography is allied with geography in its concern with the broader aspects of the Earth and its life. In early times cartographic efforts were more artistic than scientific and factual. As man explored and recorded his environment, the quality of his maps and charts improved. These lines of Jonathan Swift were inspired by early maps:

So geographers, in Afric maps,
With savage pictures fill their gaps,
And o'er unhabitable downs
Place elephants for want of towns.

      Topographic maps (topographic map) are graphic representations of natural and man-made features of parts of the Earth's surface plotted to scale. They show the shape of land and record elevations above sea level, lakes, streams and other hydrographic features, and roads and other works of man. In short, they provide a complete inventory of the terrain and important information for all activities involving the use and development of the land. They provide the bases for specialized maps and data for compilation of generalized maps of smaller scale.

      Nautical charts are maps of coastal and marine areas, providing information for navigation. They include depth curves or soundings or both; aids to navigation such as buoys, channel markers, and lights; islands, rocks, wrecks, reefs and other hazards; and significant features of the coastal areas, including promontories, church steeples, water towers, and other features helpful in determining positions from offshore.

      The terms hydrography and hydrographer date from the mid-16th century; their focus has become restricted to studies of ocean depths and of the directions and intensities of oceanic currents; though at various times they embraced much of the sciences now called hydrology and oceanography. The British East India Company employed hydrographers in the 18th century, and the first hydrographer of the Royal Navy, Alexander Dalrymple (Dalrymple, Alexander) (1737–1808), was appointed in 1795. A naval observatory and hydrographic office was established administratively in the United States Navy in 1854. In 1866 a hydrographic office was established by statute, and in 1962 it was renamed the U.S. Naval Oceanographic Office.

      Interest in the charting of oceanic areas away from seacoasts developed in the second half of the 19th century, concurrently with the perfection of submarine cables. As knowledge of the configuration of the ocean basins increased, the attention of scientists was drawn to this field of study. A feature of marine (marine geology) science since the 1950s has been increasingly detailed bathymetric (water-depth measurement) surveys of selected portions of the seafloor. Together with collection of associated geophysical data and sampling of sediments, these studies assist in interpreting the geologic history of the ocean-covered portion of the Earth's crust.

      Aeronautical charts provide essential data for the pilot and air navigator. They are, in effect, small-scale topographic maps on which current information on aids to navigation have been superimposed. To facilitate rapid recognition and orientation, principal features of the land that would be visible from an aircraft in flight are shown to the exclusion of less important details.

History of cartography
      Centuries before the Christian Era, Babylonians drew maps on clay tablets, of which the oldest specimens found so far have been dated about 2300 BC. This is the earliest positive evidence of graphic representations of parts of the Earth; it may be assumed that mapmaking goes back much further and that it began among nonliterate peoples. It is logical to assume that men very early made efforts to communicate with each other regarding their environment by scratching routes, locations, and hazards on the ground and later on bark and skins.

      The earliest maps must have been based on personal experience and familiarity with local features. They doubtless showed routes to neighbouring tribes, where water and other necessities might be found, and the locations of enemies and other dangers. Nomadic life stimulated such efforts by recording ways to cross deserts and mountains, the relative locations of summer and winter pastures, and dependable springs, wells, and other information.

      Markings on cave walls that are associated with paintings by primitive man have been identified by some archaeologists as attempts to show the game trails of the animals depicted, though there is no general agreement on this. Similarly, networks of lines scratched on certain bone tablets could possibly represent hunting trails, but there is definitely no conclusive evidence that the tablets are indeed maps.

      Many nonliterate peoples, however, are skilled in depicting essential features of their localities and travels. During Capt. Charles Wilkes's (Wilkes, Charles) exploration of the South Seas in the 1840s, a friendly islander drew a good sketch of the whole Tuamotu Archipelago on the deck of the captain's bridge. In North America the Pawnee Indians were reputed to have used star charts painted on elk skin to guide them on night marches across the plains. Montezuma is said to have given Cortés a map of the whole Mexican Gulf area painted on cloth, while Pedro de Gamboa reported that the Incas used sketch maps and cut some in stone to show relief features. Many specimens of early Eskimo sketch maps on skin, wood, and bone have been found.

Maps and geography in the ancient world
      The earliest specimens thus far discovered that are indisputably portrayals of land features are the Babylonian (Babylonia) tablets previously mentioned; certain land drawings found in Egypt (Egypt, ancient) and paintings discovered in early tombs are nearly as old. It is quite probable that these two civilizations developed their mapping skills more or less concurrently and in similar directions. Both were vitally concerned with the fertile areas of their river valleys and therefore doubtless made surveys and plats soon after settled communities were established. Later they made plats for the construction of canals, roads, and temples—the equivalent of today's engineering plans.

      A tablet unearthed in Iraq shows the Earth as a disk surrounded by water with Babylon as its centre. Aside from this specimen, dating from about 1000 BC, there appear to have been rather few attempts by Babylonians and Egyptians to show the form and extent of the Earth as a whole. Their mapmaking was preoccupied with more practical needs, such as the establishment of boundaries. Not until the time of the Greek (ancient Greek civilization) philosopher-geographers did speculations and conclusions as to the nature of the Earth begin to take form.

Greek maps and geography
      The Greeks were outstanding among peoples of the ancient world for their pursuit and development of geographic knowledge. The shortage of arable land in their own region led to maritime exploration and the development of commerce and colonies. By 600 BC Miletus, on the Aegean, had become a centre of geographic knowledge, as well as of cosmographic speculation.

 Hecataeus (Hecataeus of Miletus), a scholar of Miletus, probably produced the first book on geography in about 500 BC. A generation later Herodotus, from more extensive studies and wider travels, expanded upon it. A historian with geographic leanings, Herodotus recorded, among other things, an early circumnavigation of the African continent by Phoenicians. He also improved on the delineation of the shape and extent of the then-known regions of the world, and he declared the Caspian to be an inland sea, opposing the prevailing view that it was part of the “northern oceans” (Figure 1—>).

      Although Hecataeus regarded the Earth as a flat disk surrounded by ocean, Herodotus and his followers questioned the concept and proposed a number of other possible forms. Indeed, the philosophers and scholars of the time appear to have been preoccupied for a number of years with discussions on the nature and extent of the world. Some modern scholars attribute the first hypothesis of a spherical Earth to Pythagoras (6th century BC) or Parmenides (5th century). The idea gradually developed into a consensus over many years. In any case by the mid-4th century the theory of a spherical Earth was well accepted among Greek scholars, and about 350 BC Aristotle formulated six arguments to prove that the Earth was, in truth, a sphere. From that time forward, the idea of a spherical Earth was generally accepted among geographers and other men of science.

      About 300 BC Dicaearchus, a disciple of Aristotle, placed an orientation line on the world map, running east and west through Gibraltar and Rhodes. Eratosthenes, Marinus of Tyre, and Ptolemy successively developed the reference-line principle until a reasonably comprehensive system of parallels and meridians, as well as methods of projecting them, had been achieved.

      The greatest figure of the ancient world in the advancement of geography and cartography was Claudius Ptolemaeus ( Ptolemy; AD 90–168). An astronomer and mathematician, he spent many years studying at the library in Alexandria, the greatest repository of scientific knowledge at that time. His monumental work, the Guide to Geography (Geōgraphikē hyphēgēsis), was produced in eight volumes. The first volume discussed basic principles and dealt with map projection and globe construction. The next six volumes carried a list of the names of some 8,000 places and their approximate latitudes and longitudes. Except for a few that were made by observations, the greater number of these locations were determined from older maps, with approximations of distances and directions taken from travelers. They were accurate enough to show relative locations on the very small-scale, rudimentary maps that existed.

 The eighth volume was a most important contribution, containing instructions for preparing maps of the world and discussions on mathematical geography and other fundamental principles of cartography. Ptolemy's map of the world as it was then known marked the culmination of Greek cartography as well as a compendium of accumulated knowledge of the Earth's features at that time (Figure 2—>).

The Roman period
      Although Ptolemy lived and worked at the time of Rome's greatest influence, he was a Greek and essentially a product of that civilization, as was the great library at Alexandria. His works greatly influenced the development of geography, which he defined in mapmaking terms: “representation in picture of the whole known world, together with the phenomena contained therein.” This had considerable influence in directing scholars toward the specifics of map construction and away from the more abstract and philosophical aspects of geography.

      One fundamental error that had far-reaching effects was attributed to Ptolemy—an underestimation of the size of the Earth. He showed Europe and Asia as extending over half the globe, instead of the 130 degrees of their true extent. Similarly, the span of the Mediterranean ultimately was proved to be 20 degrees less than Ptolemy's estimate. So lasting was Ptolemy's influence that 13 centuries later Christopher Columbus (Columbus, Christopher) underestimated the distances to Cathay and India partly from a recapitulation of this basic error.

      A fundamental difference between the Greek and Roman philosophies was indicated by their maps. The Romans (ancient Rome) were less interested in mathematical geography and tended toward more practical needs for military campaigns and provincial administration. They reverted to the older concepts of a disk-shaped world for maps of great areas because they met their needs and were easier to read and understand.

      The Roman general Marcus Vipsanius Agrippa (Agrippa, Marcus Vipsanius), prior to Ptolemy's time, constructed a map of the world based on surveys of the then-extensive system of Roman military roads. References to many other Roman maps have been found, but very few actual specimens survived the Dark Ages. It is quite probable that the Peutinger Table, a parchment scroll showing the roads of the Roman world, was originally based on Agrippa's map and subjected to several revisions through medieval times.

      The tragic turn of world events during the first few centuries of the Christian Era wrought havoc to the accumulated knowledge and progress of mankind. As with other fields of science and technology, progress in geography and cartography was abruptly curtailed. After Ptolemy's day there even appears to have been a retrogression, as exemplified by the Roman trend away from the mathematical approach to mapping.

      Great accumulations of documents and maps were destroyed or lost, and the survival of a large part of Ptolemy's work was probably due to its great prestige and popularity. The only other major work on mapping to survive was Strabo's (Strabo) earlier treatise, albeit with some changes from recopying. Few of the maps and related works of the ancient world have come down to us in their original forms. The tendencies to revise and even recapitulate, when copying manuscripts, are readily understood. Doubtless, the factual content was improved more often than not, but a residual confusion remains when the specimen at hand may be either a true copy of an ancient document or a medieval scholar's version of the subject matter.

The Middle Ages
      Progress in cartography during the early Middle Ages was slight. The medieval mapmaker seems to have been dominated by the church, reflecting in his work the ecclesiastical dogmas and interpretations of Scripture. In fact, during the 6th century Constantine of Antioch created a “Christian topography” depicting the Earth as a flat disk. Thus the Roman map of the world, along with other concepts, continued as authoritative for many centuries. A contemporary Chinese map shows that country occupying most of the world, while the Roman Empire dominates most other maps produced during early Christian times.

      Later medieval mapmakers were clearly aware of the Earth's sphericity, but for the most part, maps remained small and schematic, as exemplified by the T and O renderings, so named from the stylized T-form of the major water bodies separating the continents and the O as the circumfluent ocean surrounding the world. The orientation with east at the top of the map was often used, as the word (orientation) suggests.

      The earliest navigators coasted from headland to headland; they did not require charts (navigation chart) until adoption of the magnetic compass made it possible to proceed directly from one port to another. The earliest record of the magnetic compass in Europe (1187) is followed within a century by the earliest record of a sea chart. This was shown to Louis IX, king of France, on the occasion of his participation in the Eighth Crusade in 1270. The earliest surviving chart dates from within a few years of this event. Found in Pisa and known as the Carta Pisana, it is now in the Bibliothèque Nationale, Paris. Thought to have been made about 1275, it is hand drawn on a sheepskin and depicts the entire Mediterranean Sea. Such charts, often known as portolans named for the portolano (portolan chart) or pilot book, listing sailing courses, ports, and anchorages, were much in demand for the increasing trade and shipping. Genoa, Pisa, Venice, Majorca, and Barcelona, among others, cooperated in providing information garnered from their pilots and captains. From repeated revisions, and new surveys by compass, the portolan charts eventually surpassed all preceding maps in accuracy and reliability. The first portolans were hand drawn and very expensive. They were based entirely on magnetic directions and map projections that assumed a degree of longitude equal to a degree of latitude. The assumption did little harm in the Mediterranean but caused serious distortions in maps of higher latitudes. Development of line engraving and the availability, in the 16th century, of large sheets of smooth-surfaced paper facilitated mass production of charts, which soon replaced the manuscript portolans.

      Many specimens of portolan charts have survived. Though primarily of areas of the Mediterranean and Black Sea, some covered the Atlantic as far as Ireland, and others the western coast of Africa. Their most striking feature is the system of compass roses, showing directions from various points, and lines (loxodrome) showing shortest navigational routes.

      Another phenomenon of the late Middle Ages was the great enthusiasm generated by the travels of Marco Polo (Polo, Marco) in the 1270s and 1280s. New information about faraway places, and the stimulation of interest in world maps, promoted their sale and circulation. Marco Polo's experiences also kindled the desire for travel and exploration in others and were, perhaps, a harbinger of the great age of discovery and exploration.

      During Europe's Dark Ages Islāmic and Chinese cartography made progress. The Arabs translated Ptolemy's treatises and carried on his tradition. Two Islāmic scholars deserve special note. Ibn Haukal wrote a Book of Ways and Provinces illustrated with maps, and al-Idrīsī (Idrīsī, ash-Sharīf al-) constructed a world map in 1154 for the Christian king Roger of Sicily, showing better information on Asian areas than had been available theretofore. In Baghdad astronomers used the compass long before Europeans, studied the obliquity of the ecliptic, and measured a part of the Earth's meridian. Their sexagesimal (based on 60) system has dominated cartography since, in the concept of a 360-degree circle.

      Mapmaking, like so many other aspects of art and science, developed independently in China. The oldest known Chinese map is dated about 1137. Most of the area that is now included in China had been mapped in crude form before the arrival of the Europeans. The Jesuit missionaries of the 16th century found enough information to prepare an atlas, and Chinese maps thereafter were influenced by the West.

The age of discovery and exploration
Revival of Ptolemy
      The fall of Byzantium sent many refugees to Italy, among them scholars who had preserved some of the old Greek manuscripts, including Ptolemy's Geography, from destruction. The rediscovery of this great work came at a fortunate time because the recent development of a printing industry capable of handling map reproduction made possible its circulation far beyond the few scholars who otherwise would have enjoyed access to it. This, together with a general reawakening of scholarship and interest in exploration, created a golden era of cartography.

      The Geography was translated into Latin about 1405. Although it had not been completely lost (the Arabs had preserved portions of it), recovery of the complete work, with maps, greatly stimulated general interest in cartography. About 500 copies of the Geography were printed at Bologna in 1477, followed by other editions printed in Germany and Italy. The printing process, in addition to permitting the wide diffusion of geographic knowledge, retained the fidelity of the original works. By 1600, 31 Latin or Italian editions had been printed.

Maps of the discoveries
      Progress in other technologies such as navigation, ship design and construction, instruments for observation and astronomy, and general use of the compass tended continuously to improve existing map information, as well as to encourage further exploration and discovery. Accordingly, geographic knowledge was profoundly increased during the 15th and 16th centuries. The great discoveries of Columbus, da Gama, Vespucci, Cabot, Magellan, and others gradually transformed the world maps of those days. “Modern” maps were added to later editions of Ptolemy. The earliest was a map of northern Europe drawn at Rome in 1427 by Claudius Claussön Swart, a Danish geographer. Cardinal Nicholas Krebs drew the first modern map of Germany, engraved in 1491. Martin Waldseemüller of St. Dié prepared an edition with more than 20 modern maps in 1513. Maps showing new discoveries and information were at last transcending the classical treatises of Ptolemy.

      The most important aspect of postmedieval maps was their increasing accuracy, made possible by continuing exploration. Another significant characteristic was a trend toward artistic and colourful rendition, for the maps still had many open areas in which the artist could indulge his imagination. The cartouche, or title block, became more and more elaborate, amounting to a small work of art. Many of the map editions of this age have become collector's items. The first map printings were made from woodcuts. Later they were engraved on copper, a process that made it possible to reproduce much finer lines. The finished plates were inked and wiped, leaving ink in the cut lines. Dampened paper was then pressed on the plate and into the engraved line work, resulting in very fine impressions. The process remained the basis of fine map reproduction until the comparatively recent advent of photolithography.

      The Cosmographiae, textbooks of geography, astronomy, history, and natural sciences, all illustrated with maps and figures, first appeared in the 16th century. One of the earliest and best known was that of Petrus Apianus in 1524, the popularity of which extended to 15 more editions. That of Sebastian Münster (Münster, Sebastian), published in 1544, was larger and remained authoritative and in demand until the end of the century, reflecting the general eagerness of the times for learning, especially geography.

      The foremost cartographer of the age of discovery was Gerhard Kremer, known as Gerardus Mercator (Mercator, Gerardus), of Flanders. Well educated and a student of Gemma Frisius of Leuven (Louvain), a noted cosmographer, he became a maker of globes and maps. His map of Europe, published in 1554, and his development of the projection that bears his name made him famous. The Mercator projection solved an age-old problem of navigators, enabling them to plot bearings as straight lines.

      Other well-known and productive cartographers of the Dutch-Flemish school are Abraham Ortelius (Ortelius, Abraham) of Antwerp, who prepared the first modern world atlas in 1570, and Jadocus Hondius. Early Dutch maps were among the best for artistic expression, composition, and rendering. Juan de la Cosa, the owner of Columbus' flagship, Santa María, in 1500 produced a map recording Columbus' discoveries, the landfall of Cabral in Brazil, Cabot's voyage to Canada, and da Gama's route to India. The first map showing North and South America clearly separated from Asia was produced in 1507 by Martin Waldseemüller (Waldseemüller, Martin). An immense map, 4 1/2 by 8 feet (1.4 by 2.4 metres), printed in 12 sheets, it is probably the first map on which the name America appeared, indicating that Waldseemüller was impressed by the account written by the Florentine navigator Amerigo Vespucci.

      In 1529 Diego Ribero, cosmographer to the king of Spain, made a new chart of the world on which the vast extent of the Pacific was first shown. Survivors of Magellan's (Magellan, Ferdinand) circumnavigation of the world had arrived in Sevilla (Seville) in 1522, giving Ribero much new information.

      The first known terrestrial globe that has survived was made by Martin Behaim (Behaim, Martin) at Nürnberg in 1492. Many others were made throughout the 16th century. The principal centres of cartographic activity were Spain, Portugal, Italy, the Rhineland, the Netherlands, and Switzerland. England and France, with their growing maritime and colonial power, were soon to become primary map and chart centres. Capt. John Smith's (Smith, John) maps of Virginia and New England, the first to come from the English colonies, were published in London in 1612.

18th century to the present
      A reformation of cartography that evolved during the 18th century was characterized by scientific trends and more accurate detail. Monsters, lions, and swash lines disappeared and were replaced by more factual content. Soon the only decorative features were in the cartouche and around the borders. The map interiors contained all the increasing information available, often with explanatory notes and attempts to show the respective reliabilities of some portions.

      Where mapmakers formerly had sought quick, profitable output based on information obtained from other maps and reports of travelers and explorers, the new French cartographers were scientists, often men of rank and independent means. For expensive ventures, such as the triangulation of two degrees of a meridian to determine the Earth's size more accurately, they were subsidized by the king or the French Academy. Similar trends were developing across Europe.

      The new cartography was also based on better instruments, the telescope playing an important part in raising the quality of astronomical (astronomy) observations. Surveys of much higher accuracy were now feasible. The development of the chronometer (an accurate timepiece) made the computation of longitude much less laborious than before; much more information on islands and coastal features came to the map and chart makers.

The rise of national surveys
      The development in Europe of power-conscious national (nationalism) states, with standing armies, professional officers, and engineers, stimulated an outburst of topographic activity in the 18th century, reinforced to some extent by increasing civil needs for basic data. Many countries of Europe began to undertake the systematic topographic mapping of their territories. Such surveys required facilities and capabilities far beyond the means of private cartographers who had theretofore provided for most map needs. Originally exclusively military, national survey organizations gradually became civilian in character. The Ordnance Survey of Britain, the Institut Géographique National of France, and the Landestopographie of Switzerland are examples.

      In other countries, such as the United States, where defense considerations were not paramount, civilian organizations—e.g., the U.S. Geological Survey and the National Ocean Service (originally Survey)—were assigned responsibility for domestic mapping tasks. Only when World War II brought requirements for the mapping of many foreign areas did the U.S. military become involved on a large scale, with the expansion of the Oceanographic Office (Navy), Aeronautical Chart Service (Air Force), and the U.S. Army Topographic command.

      Elaborate national surveys were undertaken only in certain countries. The rest of the world remained largely unmapped until World War II. In some instances colonial areas were mapped by military forces, but except for the British Survey of India, such efforts usually provided piecemeal coverage or generalized and sketchy data. Some important national surveys will be outlined briefly.

      The work in France was organized by the French Academy, and in 1748 the Carte géométrique de la France, comprising 182 sheets, was authorized. Most of the field observations were accomplished by military personnel. The new map of France as a whole, drawn after the new positions had been computed, caused Louis XV to remark that the more accurate data lost more territory than his wars of conquest had gained. Napoleon (Napoleon I), an ardent map enthusiast, planned a great survey of Europe on a 1:100,000 scale, which was well under way when he was overthrown.

      During the 18th century Great Britain (United Kingdom) became the foremost maritime power of Europe, and the Admiralty sponsored many developments in charting as well as improvements in navigation facilities. Because of the Admiralty's prestige, other maritime nations accepted its proposal that the prime meridian for longitude reference should pass through Greenwich. Other achievements in early oceanography were Edmond Halley's (Halley, Edmond) magnetic chart, which has been continuously revised from new data. Later similar charts for currents, tides, and prevailing winds were developed.

      French progress in mapping stimulated the British to undertake a national survey. The Ordnance Survey was organized in 1791, and the first sheet (Kent), on a scale of one inch to the mile, was published in 1801. By mid-century Ireland had been surveyed at six inches to the mile. In 1858 a Royal Commission approved 1-inch, 6-inch, and 25-inch (1:2500) scales for British mapping. An earlier “first” was John Ogilby's (Ogilby, John) Britannia, published in 1675, an atlas of road strip maps plotted by odometer and compass, presaging the modern road map.

      A survey of Spain was started in the 18th century. Surveys of several German principalities were combined after unification into the Reichskarte at 1:100,000 scale. A topographic survey of Switzerland was begun in 1832. An Austrian series was started in 1806, from which the Specialkarte, later considered the most detailed maps of Europe, were derived. In China, under the Communist regime, survey and cartography groups have provided coverage of much of the country with a new 1:50,000-scale map series. Japan established an Imperial Land Survey in 1888, and by 1925 topographic coverage of the home islands, at a scale of 1:50,000, was complete.

International Map of the World (IMW)
      The International Geographical Congress in 1891 proposed that the participating countries collaborate in the production of a 1:1,000,000-scale map of the world. Specifications and format were soon established, but production was slow in the earlier years since it was first necessary to complete basic surveys for the required data, and during and after World War II there was little interest in pursuing the project. The intention to complete the series was reestablished, however, and many countries have returned to the task. By the mid-1980s the project was nearing completion.

World War II and after
      World War I, and to a much greater extent World War II, brought great progress in mapping, particularly of the unmapped parts of the Earth; an appraisal by the U.S. Air Force indicated that in 1940 less than 10 percent of the world was mapped in sufficient detail for even the meagre requirements of pilot charts. A major program of aerial photography and reconnaissance mapping, employing what became known as the trimetrogon method, was developed. Vast areas of the unmapped parts of the world were covered during the war years, and the resulting World Aeronautical Charts have provided generalized information for other purposes since that time. Many countries have used the basic data to publish temporary map coverage until their more detailed surveys can be completed.

      The Cold War atmosphere of the 1940s and '50s promoted a continuation of militarily oriented mapping. Both NATO (North Atlantic Treaty Organization) and Warsaw Pact countries continued to improve their maps; NATO developed common symbols, scales, and formats so that maps could be readily exchangeable between the forces of member countries. Postwar economic development programs, in which maps were needed for planning road, railroad, and reservoir constructions, also stimulated much work. The United Nations provides advisory assistance in mapping to countries wishing it.

      Among other collaborations, the Inter-American Geodetic Survey, in which the U.S. Army provides instruction and logistic support for mapping, was organized. Although this cooperation primarily involved Latin-American countries, similar arrangements were made with individual countries in other parts of the world. Cooperation and exchange of data in hydrographic surveys, aeronautical charting, and other fields has continued.

      Although some terrain data are available for practically all of the world, the data for many sectors remain sketchy. Surveys of Antarctica by the several countries active there are in progress, but the continent will not be completely mapped for some years. The goal of most countries is to achieve adequate coverage for general development needs. Much remains to be done. Even in countries like the United States that have not yet completed the initial coverage, many of the maps prepared in earlier years are already in need of revision. Thus, even when mapping is completed, requirements for greater detail and revision will continue to make demands upon the funds available.

       aerial photography, which permits accurate and detailed work within feasible cost ranges, has dominated basic mapping in recent years. During World War I aerial photography was used for reconnaissance mapping, and after the war rapid progress was made in optics, cameras, plotting devices, and related equipment. By World War II much of the highly sophisticated equipment now in use had been designed. Electronic distance-measuring devices have made field surveys easier and more accurate, while much improved circle graduation has made theodolites (transits) lighter as well as more precise. Computers and automation, which together have transformed the mapping procedures of yesterday, are described below in the section Modern mapmaking techniques (map).

Mapmaking

Elements
      Map design is a twofold process: (1) the determination of user requirements, with attendant decisions as to map content and detail, and (2) the arrangement of content, involving publication scale, standards of treatment, symbolizations, colours, style, and other factors. To some extent user requirements obviously affect standards of treatment, such as publication scale. Otherwise, the latter elements are largely determined on the basis of efficiency, legibility, aesthetic considerations, and traditional practices.

      In earlier productions by individual cartographers or small groups, personal judgments determined the nature of the end product, usually with due respect for conventional standards. Map design for large programs, such as the various national map series of today, is quite formal by comparison. In most countries, the requirements of official as well as private users are carefully studied, in conjunction with costs and related factors, when considering possible changes or additions to the current standards.

      Requirements of military agencies often have a decisive influence on map design, since it is desirable to avoid the expense of maintaining both civil and military editions of maps. International organizations and committees are additional factors in determining map design. The fact that development of changes in design and content of national map series may become rather involved induces some reluctance to change, as does the fact that map stocks are usually printed in quantities intended to last for 10 or more years. Also, frequent changes in treatments result in extensive overhauls at reprint time, with consequent inconsistencies among the standing editions.

      Planning for the production of a national series involves both technical and program considerations. Technical planning involves the choice of a contour interval (the elevation separating adjacent contour lines, or lines of constant elevation), which in turn determines the height of aerial photography and other technical specifications for each project. The sequence of mapping steps, or operational phases, is determined by the overall technical procedures that have been established to achieve the most efficiency.

      The program aspects of planning involve fiscal allotments, priorities, schedules, and related matters.

      Production controls also play important roles in large programs, where schedules must be balanced with capacities available in the respective phases to avoid backlogs or dormant periods between the mapping steps. Considering that topographic maps may require two years or more to complete, from authorization to final printing, the importance of careful planning is evident. Many factors, including the weather, can converge to cause delays.

Map scales and classifications
      Map scale refers to the size of the representation on the map as compared to the size of the object on the ground. The scale generally used in architectural drawings, for example, is 1/4 inch to one foot, which means that 1/4 of an inch on the drawing equals one foot on the building being drawn. The scales of models of buildings, railroads, and other objects may be one inch to several feet. Maps cover more extensive areas, and it is usually convenient to express the scale by a representative fraction or proportion, as 1/63,360, 1:63,360, or “one-inch-to-one-mile.” The scale of a map is smaller than that of another map when its scale denominator is larger: thus, 1:1,000,000 is a smaller scale than 1:100,000. Most maps carry linear, or bar, scales in one or more margins or in the title blocks.

      Nautical charts are constructed on widely different scales and can be generally classified as follows: ocean sailing charts are small-scale charts, 1:5,000,000 or smaller, used for planning long voyages or marking the daily progress of a ship. Sailing charts, used for offshore navigation, show a generalized shoreline, only offshore soundings, and are at a scale between 1:600,000 and 1:5,000,000. As an illustration of chart use, a 10-knot ship covers about 29 inches (74 centimetres) at 1:600,000 scale in a day.

      General charts are used for coastwise navigation outside outlying reefs and shoals and are at a scale between 1:100,000 and 1:600,000. Coast charts are intended for use in leaving and entering port or navigating inside outlying reefs or shoals and are at a scale between 1:50,000 and 1:100,000. Harbour charts are for use in harbours and small waterways, with a scale usually larger than 1:50,000.

      In rare instances reference may be made to the areal scale of a map, as opposed to the more common linear scale. In such cases the denominator of the fractional reference would be the square of the denominator of the linear scale.

      The linear scale may vary within a single map, particularly if the scale is small. Variations in the scale of a map because of the sphericity of the surface it represents may, for practical purposes, be considered as nil. On maps of very large scale, such as 1:24,000, such distortions are negligible (considerably less than variations in the paper from fluctuations of humidity). Precise measurements for engineering purposes are usually restricted to maps of that scale or larger. As maps descend in scale, and distortions inherent to their projection of the spherical surface increase, less accurate measurements of distances may be expected.

      Maps may be classified according to scale, content, or derivation. The latter refers to whether a map represents an original survey or has been derived from other maps or source data. Some contain both original and derived elements, usually explained in their footnotes. Producing agencies, technical committees, and international organizations have variously classed maps as large, medium, or small scale. In general, large scale means inch-to-mile and larger, small scale, 1:1,000,000 and smaller, leaving the intermediate field as medium scale. As with most relative terms, these can occasionally lead to confusions but are useful as one practical way to classify maps.

      The nature of a map's content, as well as its purpose, provides a primary basis of classification. The terms aeronautical chart, geologic, soil, forest, road, and weather map make obvious their respective contents and purposes. Maps are therefore often classified by the primary purposes they serve. Topographic maps usually form the background for geologic, soil, and similar thematic maps and provide primary elements of the bases upon which many other kinds of maps are compiled.

Map projections (projection)
      A great variety of map projections has been devised to provide for the various properties that may be desired in maps. In effect, a projection is a systematic method of drawing the Earth's meridians and parallels on a flat surface. Some projections have equal-area properties, while others provide for conformal delineations in which, for small areas, the shape is practically the same as it would be on a globe. Only on a globe can areas and shapes be represented with true fidelity. On flat maps of very large areas, distortions are inevitable. These effects may be minimized by selecting the projection best suited to the purpose of the map to be produced.

      Most types of projection can be grouped according to their geometric derivations as cylindrical, conic, or azimuthal. A few cannot be so related or are combinations of these. Terms such as network, graticule, or grid might have been preferable to describe the transposition of meridians and parallels from globe to flat surface, since few systems are actually derived by projection, and most in fact have been formulated by analytic and mathematical processes. The term projection, however, is well established and has some merit in helping the layman to understand the problems and solutions. The theory of trigonometric surveying was disclosed in 1533 by Gemma Frisius, a Flemish mathematician. In 1569 Gerardus Mercator (Mercator, Gerardus) solved the projection problem by producing his famous world map with the meridians vertical and parallels having increased spacing in proportion to the secant (a trigonometric function) of the latitude. Edward Wright published mathematical tables (1599) giving the basis of Mercator's projection. Tables for the construction of other commonly used projections have been developed by mapping agencies.

      Cylindrical projections (cylindrical projection) treat the Earth as a cylinder on which parallels (parallel) are horizontal lines and meridians (meridian) appear as vertical lines. The familiar Mercator projection is of this class and has many advantages in spite of the great distortions that it causes in the higher latitudes. Compass bearings may be plotted as straight segments on these projections, which have been traditionally used for nautical charts. On cylindrical projections places of similar latitude appear at the same height. Parallels and meridians may, if desired, be omitted from the body of the map and instead simply indexed at the margins, while lettering can be placed horizontally rather than in a curve. Among the variations of cylindrical projections is the Transverse Mercator, in which the cylinder is tangent to the Earth not along the Equator but along a chosen meridian, a treatment that has advantages in drawing maps that are long in the north–south direction.

      Virtually all navigational charts are constructed on the ordinary Mercator projection; the only navigational charts not on ordinary Mercator projections are great-circle (great circle route) charts and charts of the polar regions. Great-circle charts, which are maps of large areas, such as the entire Pacific Ocean, are ordinarily on very small scales with gnomonic projection. The navigator uses them to lay out a track between ports perhaps thousands of miles apart and then transfers the latitudes corresponding, for example, to each 5° of longitude, to his ocean sailing chart. He thus arrives at a series of short rhumb-line courses, each of which makes the same angle with all meridians, that closely approximate the shortest distance between the two ports.

      Conic projections are derived from a projection of the globe on a cone drawn with the point above either the North or South Pole and tangent to the Earth at some standard or selected parallel. Occasionally the cone is arranged to intersect the Earth at two closely spaced standard parallels. A polyconic projection, used in large-scale map series, treats each band of maps as part of a cone tangent to the globe at the particular latitude.

      Azimuthal, or zenithal, projections picture a portion of the Earth as a flattened disk, tangent to the Earth at a specified point, as viewed from a point at the centre of the Earth, on the opposite side of the Earth's surface, or from a point far out in space. If the perspective is from the centre of the Earth, the projection is called gnomonic; if from the far side of the Earth's surface, it is stereographic; if from space, it is called orthographic. (orthographic projection)

      A type of projection often used to show distances and directions from a particular city is the Azimuthal Equidistant. Such measurements are accurate or true only from the selected central point to any other point of interest.

      The polar projection is an azimuthal projection drawn to show Arctic and Antarctic areas. It is based on a plane perpendicular to the Earth's axis in contact with the North or South Pole. It is limited to 10 or 15 degrees from the poles. Parallels of latitude are concentric circles, while meridians are radiating straight lines.

Development of reference spheroids
      Tables from which map projections of the more familiar kinds may be plotted have been available for some years and have been based on the best determinations of the size and shape of the Earth available at the time of their compilation. The dimensions of Clarke's Spheroid (introduced by the British geodesist Alexander Ross Clarke (Clarke, Alexander Ross)) of 1866 have been much used in polyconic and other tables. A later determination by Clarke in 1880 reflected the several geodetic surveys that had been conducted during the interim. An International Ellipsoid of Reference was adopted by the Geodetic and Geophysical Union in 1924 for application throughout the world.

      The development of electronic distance-measuring systems has facilitated geodetic surveys. During the late 20th century, satellite observation and international collaborations have led to an accurate determination of the size and shape of the Earth and to the possibility of adjusting all existing primary geodetic surveys and astronomical observations to a single world datum.

Geographic and plane coordinate systems
      The standard geographic coordinate system of the world involves latitudes north or south of the Equator and longitudes east or west of the Prime Reference Meridian of Greenwich (Greenwich meridian). Map and control point references are stated in degrees, minutes, and seconds carried to the number of decimal places commensurate with the accuracy to which locations have been established.

      Geodetic surveys, being of extensive areas, must be adjusted for the Earth's curvature, and reductions must be made to mean sea level for scale. The computations are therefore somewhat involved. As a convenience for engineers and surveyors, many countries have established official plane coordinate systems for each province, state, or sector thereof. By this means, all surveys can be “tied” to control points in the system without transposition to geographic coordinates.

      In large countries such as the United States, two basic projections are commonly selected to provide systems with minimum distortions for each state or region. For those long in north–south dimension, the Transverse Mercator is generally used, while for those long in east–west direction, the Lambert conformal (Lambert conformal projection) (intersecting cone) projection is usually employed. In the case of large regions, two or more zones may be established to limit distortions. Positions of geodetic control points have been computed on the plane coordinate systems and have been made available in published lists.

Basic data for compilation
      Maps may be compiled from other maps, usually of larger scale, or may be produced from original surveys and photogrammetric compilations. The former are sometimes referred to as derived maps and may include information from various sources, in addition to the maps from which they are principally drawn. Most small-scale series, such as the International Map of the World and World Aeronautical Charts, are compiled from existing information, though new data are occasionally produced to strengthen areas for which little or doubtful information exists. Thus compiled maps may contain fragments of original information while those representing original surveys may include some existing data of higher order, such as details from a city plat.

      Road maps, produced by the millions, are compiled from road surveys, topographic maps, and aerial photography. City maps often represent original surveys, made principally to control engineering plans and construction. Some are, however, compiled from enlargements of topographic maps of the area.

      Notations regarding the sources from which they were drawn are usually carried on compiled maps. This sometimes includes a reliability diagram showing the areas for which good information was available and those that may be less dependable. Comments regarding certain features or areas, which the editor may deem helpful to the user, may be made in the map itself.

      Maps reflecting original surveys, such as a national topographic map series, carry standard marginal information. Date of aerial photography, process and instrumentation employed, notes regarding control and projection, date of field edit, and other information may be included. References to the availability of adjoining maps and those of other scales or series may also be included. Marginal ticks for intervals of plane coordinate systems, military grids, and other reference features are also shown and appropriately labeled.

      Symbols are the graphic language of maps and charts that has evolved through generations of cartographers. The symbols doubtless had their origins as simple pictograms that gradually developed into the conventions now generally used.

      Early cartographers recognized that common usages and conventions would minimize confusion and to some extent simplify compilation and engraving. Efforts in this direction were made over the years, but cartographers, being artists of a sort, preferred to vary their styles, and effective standardization was not achieved until comparatively recent times. National agencies in most countries established conventions with due regard to practices in other countries. International Map of the World agreements, NATO conventions, and the efforts of the United Nations and of international technical societies aid standardization.

      Symbols may be broadly classed as planimetric or hypsographic or may be grouped according to the colours in which they are conventionally printed. Black is used for names and culture, or works of man; blue for water features, or hydrography; brown for relief, or hypsography; green for vegetation classifications; and red for road classes and special information. There are variations, however, particularly in special-purpose series, such as soil and geologic maps. Symbols will also vary, perforce, because of limitations of space in the smaller scales and the feasibility of drawing some features to true scale on large maps. Legends explain the less obvious symbols on many maps, while explanatory sheets or booklets are available for most standard series, providing general data as well as symbol information. When less familiar symbols are used on maps they are often labeled to prevent misunderstanding. The general located-object symbol, with label, is often used in preference to specific symbols for such objects as windmills and lookout towers for similar reasons.

      Planimetric features (those shown in “plan,” such as streams, shorelines, and roads) are easier to portray than shapes of land and heights above sea level. Mountains were shown on early maps by sketchy lines simulating profile or perspective appearance as envisioned by the cartographer. Little effort was made at true depiction as this was beyond the scope of available information and existing capabilities. Form lines and hachures, among other devices, were also used in attempting to show the land's shape. Hachures are short lines laid down in a pattern to indicate direction of slope. When it became feasible to map rough terrain in more detail, hachuring developed into an artistic speciality. Some hachured maps are remarkable for their detail and fidelity, but much of their quality depends on the skill of draftsman or engraver. They are little used now, except where relief is incidental.

      Contours (contour mapping) are by far the most common and satisfactory means of showing relief. Contours are lines that connect points of equal elevation. The shorelines of lakes and of the sea are contours. Such lines were little used until the mid-19th century, mainly because surveys had not generally been made in sufficient detail for them to be employed successfully. Mean sea level is the datum to which elevations and contour intervals are generally referred. If mean sea level were to rise 20 feet (six metres) the new shoreline would be where the 20-foot contour line is now shown (assuming that all maps on which it is delineated are reasonably accurate).

      The quality of contour maps, until recent times, depended largely on the sketching skill of the topographer. In earlier days funds available for topographic mapping were limited, and not much time could be spent in accurate placement. Later, the accurate location of more control points became feasible. An approximate scale of reliability is therefore indicated by the date of a topographic survey, taking into account the respective situations that existed in various countries. Modern surveys, being based on aerial photos and accurate plotting instruments, are generally better in detail and accuracy than earlier surveys. The personal skill of individual topographers, long a factor in map evaluations, has therefore been substantially eliminated.

      Hill shading, or shaded relief, layer or altitude tinting, and special manipulations of contouring are other methods of indicating relief. Hill shading requires considerable artistry, as well as the ability to visualize shapes and interpret contours. For a satisfactory result, background contours are a necessary guide to the artist. Hypsographic tinting is relatively easy, particularly since photomechanical etching and other steps can be used to provide negatives for the respective elevation layers. Difficulty in the reproduction process is sometimes a deterrent to the use of treatments involving the manipulation of contours.

      In the past, three-dimensional maps were laboriously constructed for studies in military tactics and for many other purposes. They were costly to produce, as contour layers had to be cut and assembled, filled with plaster and painted, after which streams, roads, etc., had to be drawn on the surface. Lettering then was applied, and models of large structures, such as buildings and bridges, were added. In view of the time and cost involved in such productions, they were sparingly used until recent years when better production methods and materials became available. During and after World War I a process was developed and improved whereby an aluminum sheet was “raised” by tapping along the contours copied on its surface. When the contours selected for tapping were completed, the sheet became, in effect, a mold for shaping plastic sheets to its convolutions. The map was printed on plastic sheets prior to the thermal process of shaping them to the mold. Sets of relief maps were soon produced in this manner for use in schools, military briefings, and many other activities.

      During and after World War II the production of plastic relief maps was greatly expanded, while the processes and equipment were further improved and refined. Most significant among these developments was a pantograph-router, which cuts a model from plaster or other suitable material as the selected contours are followed by the operator on a topographic map. This eliminated the distortions inherent in shaping metal sheets by the tapping process. Selected topographic maps are now published in limited relief editions for military instruction, special displays, and general classroom instruction.

      Most relief maps are exaggerated severalfold in the vertical scale. The Earth is remarkably smooth, when viewed in actual scale, and many significant features would hardly be distinguishable on a map without some vertical exaggeration. Mt. Everest, for example, is actually only one-seventh of 1 percent of the Earth's radius in height, or only one-third of an inch (about eight millimetres) at a scale of 1:1,000,000. For this reason relief is usually shown at five, or even 10, times actual scale, depending upon the nature of the area represented. This exaggerated relief scale is always explained in the map legend.

      All possible places and features are identified and labeled to maximize the usefulness of the map. Some names must be omitted, particularly from maps of smaller scales, to avoid overcrowding and poor legibility. The editor must decide which names may be eliminated, while arranging placements so that a maximum number may be accommodated.

      Geographic names are the most important, and sometimes the most troublesome, part of the map nomenclature as a whole. Research on existing maps and related documents for a given area may reveal different names for the same features, variations in spelling, or ambiguous applications of names. The field engineer often finds that local usage is confused and sometimes controversial. Various types of official organizations have been established to study the problems submitted and decide the forms and applications that are to be used in government maps and documents. This function is exercised in the United States by the Board on Geographic Names (Geographic Names, Board on) and in the United Kingdom by the Permanent Committee on Geographical Names; worldwide these activities are coordinated by the United Nations Conference on the Standardization of Geographical Names.

      The science of place-names, or toponymics (toponymy), has become a significant specialty since World War II, and efforts have been made to establish uniform usages and standards of transliteration throughout the world. Renewed interest in completing the remaining sheets of the International Map of the World, collaborations resulting from military alliances, and efforts of committees of international scientific societies and the United Nations have contributed to these efforts.

      At the local levels, however, there are different kinds of problems. The larger scales of most basic topographic map series permit the naming of quite minor hilltops, ridges, streams, and branches, for which designations can be obtained locally. In sparsely settled country few names in actual use may be obtained for minor features, while in other areas inquiries may reveal inconsistencies and confusions in both spelling and application of local names. In some areas, for example, local residents may tend to refer to small streams by the name of the present occupant of the headwater area. The occupants of opposite sides of a mountain sometimes refer to it by different names. In coastal areas the waterman and landsman may use different references for the same features.

      A prime opportunity for resolving these problems is presented when a topographic map of an area is prepared for publication. By extensive inquiry and documentation and research of local records and deeds, the appropriate form and application of nearly all names can be determined. Publication and distribution of the map as an official document may then tend to solidify local usage and eliminate the confusions that previously existed.

      Lettering is selected by the map editor in styles and sizes appropriate to the respective features and the relative importance of each. For topographic maps and most others that follow conventional practice, four basic styles of lettering are used in the Western world. The Roman style is generally used for place-names, political divisions, titles, and related nomenclature. Italic is used for lakes, streams, and other water features. Gothic styles are usually applied to land features such as mountains, ridges, and valleys. Man-made works such as highways, railroads, and canals are usually labeled in slope Gothic capitals, but other distinctive styles are often used for these, together with descriptive notes.

      The relative importance of map features is reflected in the different sizes of lettering selected to label them. The most prominent places and features are usually shown in capitals, while lesser ones are labeled with lowercase lettering. In the labeling of cities, however, uppercase lettering is often reserved for state or province capitals. County seats are also labeled in this manner on topographic maps of the United States. For other towns, where lowercase lettering is in order, the sizes selected reflect their relative importance. The use of hand lettering has been abandoned in favour of words and figures printed by type or by a photographic process onto transparent material that is “floated” onto the compilation and anchored by an adhesive wax backing in the proper place. Compass roses and graphic scales are added in the same manner.

Types and uses of maps and charts
World status of mapping and basic data
      Before World War I only a few countries, such as Great Britain, France, and Germany, had detailed maps covering their whole national areas. Now many countries have completed coverage of their territories, while others have carried out small-scale coverage and are beginning engineering surveys in selected areas.

      It has been demonstrated that the full potential of map usage in a country, state, or province is not realized until some time after complete coverage has become available. When a modern, detailed map replaces an earlier issue, annual distribution can increase dramatically.

      Topographic maps provide the basic data for many other kinds as well as working bases for thematic maps showing geology, soils, and vegetation types. The progress of such mapping in the various parts of the world is therefore a primary indicator of the status of cartography in general. A United Nations survey of the status of world mapping is taken periodically. Inquiries are made to the mapping organizations of all member countries regarding the extent of their respective map coverage, publication scales, and related data.

      About a third of the world's land area is now covered by maps at scales of 1:75,000 and larger. Some of such coverage is culturally obsolescent or of low structural quality. An additional third is covered by medium-scale topographic maps; i.e., up to 1:125,000 (about two miles to the inch). Some of this is inferior coverage at medium scales, lacking in geodetic control and topographic detail. This is the case with much of China, but most of the mapping is quite adequate for purposes of reconnaissance and as source information for smaller scale maps.

      This provides a general indication of the relative reliability of data contained in such world series maps as the 1:1,000,000-scale aeronautical charts and International Maps of the World. Areas of doubtful information are left blank or are drawn with broken lines. In spite of this dearth of reliable data, most of the IMW sheets have been compiled, and most of the aeronautical pilotage charts have been published, to provide navigation continuity across water areas as well as over unmapped parts of the world.

      In some areas, however, large-scale topographic maps are not required. Australia, for example, has large-scale coverage only of its populated coastal areas in the east; in the Outback areas 1:250,000-scale maps are considered adequate for most needs, and a program for their production is well under way. Likewise, large areas of tundra, as in Siberia, deserts in many parts of the world, and other sparsely populated areas may be adequately served with medium- or small-scale coverage until specific development sites require engineering maps.

      Nautical chart coverage of the world leaves much to be desired. Good progress has been made, however, on areas bordering the continents and islands. The Arctic, Antarctic, South Pacific, and South Atlantic oceans are the most deficient in good coverage. The Defense Mapping Agency, through agreement with the British Admiralty and other chart-producing countries, maintains worldwide coverage that is constantly updated. The National Ocean Service (originally Survey) maintains charts of U.S. coastal waters. The International Hydrographic Organization (until 1967 Bureau), based at Monaco, attempts to stimulate cooperation in improvement of hydrographic data in general. This organization's General Bathymetric Chart of the Oceans shows existing knowledge and is revised from time to time as new data are accumulated.

      Coverage of reliable aeronautical charts parallels the availability of topographic maps that provide the essential terrain and cultural data. For this purpose, good 1:250,000scale maps contain sufficient information for clearance safety and position identification.

      Until recently the progress of geodetic triangulation, the basic survey method, was more or less limited to areas either covered by good topographic maps or scheduled for mapping. Preparations for cadastral surveys, where land partition problems abound, have occasionally led to early geodetic programs. Coastal and other surveys also require good basic control to be fully effective; however, it is again the developed and heavily populated areas that are encompassed with the best geodetic surveys. Electronic distance-measuring systems accelerated the progress of geodetic surveys during the 1960s and extended continental schemes over many ocean areas. International cooperation on satellite triangulation is now in progress, with the prospect that existing triangulation of the continents may soon be tied together and adjusted into a single world datum. The Inter-American Geodetic Survey has made progress in the Americas.

      In addition to other applications, aerial (aerial photography) photographs provide a useful supplement to topographic maps. Indeed, where maps are not available, aerial photographs invariably serve as map substitutes in spite of inherent distortions and lack of elevation data. Most of the world is covered by aerial photography.

      During World War II the U.S. Air Force photographed vast areas of the world, providing reconnaissance maps that were used as bases for aeronautical charts. Much of this information now forms the basis for small-scale map coverage in still remote areas. The system of photography and mapping became known as the trimetrogon process. In it, three wide-angle cameras are used to photograph the terrain from horizon to horizon across the line of flight from an elevation of 20,000 feet (6,100 metres). Detail is usually discernible and plottable for several miles on each side of the line of flight, and occasional points, required for photo-triangulation, can be identified farther out. With higher flight capabilities, wider-angle cameras, and lenses of fine resolution, the progress of aerial photography has been accelerated. Films have been much improved for fineness of emulsion grain and scale stability. Satellite (satellite communication) photography and high-altitude flights with super-wide-angle cameras are now under way in the remaining areas of the world. Infrared and colour film developments have greatly improved photo-interpretation capabilities, providing much better delineations for coastal charts, geologic maps, timber and soil classifications, and other thematic mapping.

Types of maps and charts available
      Although the range of maps and charts now available in many countries is so extensive that a complete listing is impractical, any list of the principal types would have to include aeronautical (worldwide and national), congressional or political districts, population distribution, geologic (various scales), highways (national and secondary political units), historical, hydrographic (coastal areas, inland waters, foreign waters), national forests, forest types, public land survey plats, soil, and topographic (national and foreign).

      The National Atlas of the United States of America, published by the Geological Survey in 1970, contains contributions from all of that country's mapping agencies. Summaries are provided of all thematic and economic data of interest. The atlas also indicates where more detailed information or large-scale specialized maps may be obtained. Many countries have centres where detailed information on existing map series and related data may be obtained. In the United States this service is performed by the Map Information Office of the U.S. Geological Survey, which publishes and distributes indexes of each state showing map coverage and ordering information. Summary data on geodetic control and aerial photography are also maintained.

      The situation is less complex in other countries where mapping activities are concentrated in one or two organizations—e.g., Ordnance Survey in Great Britain and Institut Géographique National in France. The main agencies can advise where maps produced by others may be obtained. Technical societies maintain large map reference libraries and are prime sources of information, as are the map sections of national libraries and museums.

Government and other mapping agencies
      The following are the primary agencies of selected countries having advanced mapping programs.

      Military agencies play large roles in the mapping activities of many countries. Frequently, a small cadre of officers administers the mapping facilities, while most of the production personnel are civilian. Many countries, such as Iran and the United States, have both civilian and military organizations that collaborate in developing their respective programs and in performing the actual mapping.

      Most countries have private and commercial organizations that produce maps. The widely distributed road maps noted earlier are printed by a few large producers who, in cooperation with others, compile the maps. Very large-scale maps—for example, for road construction and other engineering works—are produced under contract by a number of mapping companies. Some local highway departments have their own photogrammetric units to provide or supplement such productions. City surveys and maps for real-estate developments, tax records, power lines, and so on are largely produced by commercial organizations.

      Large societies, such as the American Geographical Society, the National Geographic Society, and the Royal Geographical Society, play important roles in addition to being centres of reference as noted above. The National Geographic Society produces popular small-scale maps of the various regions of the world. The American Geographical Society has compiled many maps, most notably a 1:1,000,000 coverage of Hispanic America on standards similar to those of the International Map of the World. Technical societies, such as the American Congress on Surveying and Mapping, the American Society of Photogrammetry, the American Society of Civil Engineers, and others, lend their support to mapping programs and activities. They issue technical papers and hold frequent meetings where new processes and instrumentation are discussed and displayed. The Manual of Photogrammetry and Journal, produced by the American Society of Photogrammetry, Photogrammetria, published by the International Society for Photogrammetry and Remote Sensing, and Surveying and Mapping, published by the American Congress on Surveying and Mapping, are prime examples of important contributions that societies make to the overall progress of mapping.

International organizations
      Many societies and other types of organizations are now engaged in activities associated with maps and mapping. In general, they encourage cooperation through meetings and articles in their journals; some are more directly concerned with the dissemination of information on the progress of particular kinds of mapping and charting. Standardizations of map treatments and conventional signs as well as the promotion of progress in technical processes are further objectives of such groups.

      The United Nations Office of Cartography plays an important role in all of the activities noted above. It maintains records of progress on the International Map of the World and performs related services formerly handled by the Central Bureau of the IMW. Technical assistance in the development of mapping facilities and programs is provided on request. Occasional regional meetings are arranged for groups of countries having similar problems, while the journal World Cartography publishes related papers.

      The Inter-American Geodetic Survey is a special unit of the U.S. Corps of Engineers organized to forward the completion of geodetic surveys and mapping in the Americas. Through technical training and assistance with programs, geodetic surveys in Central and South America have been greatly advanced in recent years. Training in photogrammetry is offered and has promoted the establishment of mapping facilities and programs in many of the collaborating countries.

      The Pan American Institute of Geography and History has sponsored regular meetings and consultations on cartography, much in the manner of scientific societies. The consultations are held in different countries each year.

      The International Hydrographic Bureau was founded in 1921 in Monaco, where it has been headquartered through the years. It serves as a clearinghouse for information related to hydrography and charting and maintains a General Bathymetric Chart of the World, which is revised periodically to include data furnished by the maritime nations participating in their programs and conferences. Other organizations that promote progress in the various aspects of mapping and charting are the International Association of Geodesy, the International Cartographic Association, the International Civil Aviation Organization, the International Geographical Union, the International Federation of Surveyors, the International Society for Photogrammetry and Remote Sensing, and the International Union of Geodesy and Geophysics.

Modern mapmaking techniques
Compilation from existing materials
      The preparation of derived maps—i.e., maps that are compiled from other maps or existing data—involves the search for, and evaluation of, all extant data pertaining to the subject area. Depending on the nature of the map to be compiled, thoroughgoing research includes boundary references, historical records, name derivations, and other materials. Selection of the most authentic items, on the frequent occasions when some ambiguities are detected, requires careful study and references to related materials. The sources finally selected may require some adjustment or compromise in order to fit properly with adjacent data. When it becomes evident that some sources are of questionable reliability, the cartographer explains this in the margin of his compilation. Sometimes this is placed in the body of the map where the doubtful features or delineations are located.

      When selected materials have been assembled they are reduced to a common scale and copied on the compilation base, often in differentiating colours for the respective features. Reductions to a common scale are usually made by photography but may be made by projection and traced directly on the drawing. Minor adjustments may have to be made during compilation even though the source materials are of good quality. In particular, the need to make appropriate generalizations, omitting some details in smaller scale maps, requires much study and judgment.

      Except for the new methods of preparing final colour-separation plates by scribing (described below), rather than by drafting or copperplate engraving, compilation processes have changed little over the years. Automatic-focusing projectors and better illumination have made the tracing of selected data at compilation scale easier. Better and more extensive facilities for photoreduction and copying, improved light tables, and a wider choice of drafting materials and instruments have served to facilitate compilation. The basic chores of research, selection of best data, and adjustment of these into the compilation, however, remain essentially the same.

      The preparation of small-scale maps from large ones is sometimes simpler than the process just described, which pertains to compilation from a miscellany of differing sources. The relatively straightforward preparation of 1:62,500-scale maps from those of the 1:24,000-scale series, for example, may require little more than photoreduction and colour-separation drafting, or scribing. Even in this case some generalizations, as well as omission of a few of the least important details, are in order. To avoid the considerable expense involved in such scale conversions, straight photoreduction of colour-separation plates appears to be a promising procedure.

      Larger reductions from one map series to another—1:62,500 to 1:250,000 for instance—are more of a problem, since the need for generalization is greater and the omission of many details is involved. The considerable differences in road and other symbol sizes also create displacement problems.

      The component maps are reduced, and the negatives are cut and assembled into a mosaic on a clear sheet of plastic, the master negative of which provides guide copy for the several colour-separation plates required, which are then completed for reproduction. More often, however, it is necessary to make an intermediate compilation rather than burden the draftsman with too many adjustments to be made while following copy on the colour-separation plates. The intermediate scale for initial reduction of the component maps provides better legibility than direct photography to reproduction scale. This negative mosaic is copied on a metal-mounted drafting board. A compiler then inks the whole map, usually in three or more contrasting colours. He also draws roads and other symbols at the intermediate size, so that they will reduce to proper dimensions at reproduction scale, and makes the necessary displacement adjustments. Minor features and terrain details to be omitted on the new map are not inked in. The drawing is now ready for photoreduction to the final colour-separation plates, providing much better copy for the draftsman or engraver than direct reduction in one step would have produced.

      Most smaller scale map series are prepared from large-scale maps as described above. In earlier days original reconnaissance surveys were made at small scales such as 1:192,000 for publication at 1:250,000. Ideally, the small-scale series of maps should be compiled progressively from those of larger scale and greater detail. Most countries, however, started their mapping programs with relatively small-scale reconnaissance surveys because of economic considerations. Later, affluence and technical competence permitted mapping at larger scales with better accuracy.

      Geologic, soil, and other thematic maps usually have a topographic base from which woodland tints and road classification printings have been omitted. Such a map, therefore, has a topographic background printed in subdued colours on which the geologic or soil patterns are overprinted in prominent colours. Small-scale thematic maps showing weather patterns, vegetation types, and a large amount of economic and other information are of similar origin. Backgrounds are drawn from appropriate outline maps of provinces, countries, or regions of the world, while overlaying subject matters are compiled from specialized sources of information.

Generalization of detail
      The generalization of detail is a problem that frequently confronts the cartographer in original mapping and in reducing the scale of existing maps. There are two principal reasons for taking such liberties (or topographic license in the case of the original mapping). The primary purpose is to avoid overcrowding and the resulting poor legibility. In addition, the degree of generalization or detail should be as consistent as possible throughout the map. Generalizations in some parts and excessive detail in others confuse the user and make the map's reliability suspect. Effective generalization requires good judgment based on seasoned knowledge and experience.

      In approaching such problems as the thousands of islets in the Stockholm archipelago or the thousands of small lakes in the Alaskan tundra areas, when the map scale will accommodate only a small number, the cartographer may decide to draw the features in groupings that reflect the patterns shown in the large-scale source maps or aerial photos. This is difficult and at best presents the nature of the respective areas rather than a literal portrayal. There is also the possibility that the source maps may already have been generalized by some omissions to accommodate to their own scales. Another device is to note, in appropriate text or marginal references, that many minor lakes or islets are omitted because of scale. Such areas may also be symbolized and explained. The “pattern” representation noted above is actually a form of symbolization.

      Intricate coastlines are also extremely difficult to generalize consistently. Here again, the purpose is to omit minor details while retaining the main features and their distinguishing characteristics. These and many equally perplexing questions arise in preparing maps of very small scale from any source. The problems of equalization of detail are also present in such cases. The topographer of earlier days had the equalization problem between areas close at hand and those viewed distantly. In addition, the topographer had to deal with terrain on the far sides of obscuring features.

      Photogrammetrists (photogrammetry)—that is, persons who compile original maps from aerial photos—have similar problems when, for example, one side of a ridge is seen in more detail than the opposite side. Indeed, in steep terrain, parts of the far sides of some mountains are not seen at all. Appropriate steps must be taken in such cases to avoid differing renditions on opposite sides of the mountain. This may be accomplished by adding, in field completion of the manuscript map, the segments not seen by the photogrammetrist; or additional aerial photography, patterned to cover the obscured sectors, may be requested.

Map production from original surveys
      The instrumentation, procedures, and standards involved in making original surveys have improved remarkably in recent years. Geodetic, topographic, hydrographic, and cadastral surveys have been facilitated by the application of electronics and computer sciences. At the same time, superior optics and more refined instruments, in general, have enhanced the precision of observations and accuracies of the end products.

      The improved quality of surveys has increased the reliability of maps and charts based on them. In turn, the greater output of basic data has accelerated the production of maps and charts, while parallel improvements in processing steps have increased the volume and improved the final product. In a sense the production of maps from original surveys parallels the process steps after a compilation is made from derived sources. This phase is sometimes referred to as map finishing and involves editing, colour separation, and printing. In original surveys for topographic maps and nautical charts, however, the end products are provided for in all the process steps leading to the completed basic manuscript. The manuscript scale is, for example, selected to accommodate the plotting instruments involved as well as the final rendering for printing. In early years it was usual to choose a manuscript scale somewhat larger than that prescribed for publication. This was to allow for some generalization and line refinement in the final reduction. Thus, maps to be published at 1:62,500 scale were plotted in the field at 1:48,000 or thereabouts. With modern photogrammetric instruments, plotting is usually at reproduction scale.

      Maps are not directly derived from geodetic surveys, and only land-line plats are produced from cadastral surveys. Accordingly, the primary original map and chart productions are those from topographic and hydrographic surveys. The surveys are somewhat similar as the nautical chart is, in effect, a topographic map of the coast with generalized offshore topography interpolated from depth soundings.

      A variety of electronic devices are used to determine a survey ship's precise location while taking soundings, which are also made with electronic equipment. Both hydrographic and topographic surveys now employ aerial photography and precise plotting instruments to develop the base map. In order to simplify the description of modern mapmaking techniques, the process developed for topographic mapping will be described below, with comments where procedures for nautical charts differ significantly. Both processes start by expanding upon the basic control previously established from geodetic surveys.

      Surveying, in which the facts are discovered and recorded, must precede mapping, in which the facts are presented in graphic form. Surveying involves (1) global positioning, in which the area to be mapped is located on the Earth's surface, usually by fixing a number of points in the area by astronomical observations or, after the techniques became available, by satellite or radar procedures; (2) establishing the framework, in which these points, and commonly many others connected by some combination of distance and angle measurements, are integrated into an accurately defined structure—like the steel framework of a modern building—on which the detail survey is based; and (3) making the detail survey, which establishes by less accurate (and therefore cheaper) methods the relative positions and shapes of the features being mapped. Constant reference to the framework prevents the errors in the detail survey from accumulating and growing unacceptably large.

      Mapping also consists of three steps: (1) fair drawing, in which the accurate but not publishable surveyor's plot is redrawn by a skilled cartographer with uniform lines and lettering and, if a multicoloured map is being produced, is separated into several drawings, one for each colour; (2) reproduction, in which a negative is prepared from each of the fair-drawn originals and special colouring (to represent areas of vegetation, for example) is added; and (3) printing, in which a printing plate is made from each negative, the plates are mounted on a press, proofs (a few trial copies) are made to facilitate correction of errors and blemishes, and the final maps are produced.

Final steps in map preparation
      After all the features visible in the aerial photographs have been mapped, the manuscripts are contact printed on coated plastic sheets for review by the field engineer. He examines the whole map, adding such details as houses, trails, and fences that were not visible or were overlooked by the photogrammetrist. Political lines such as state, county, and township limits are located, as are geographic and other names in local use. Roads are classified, and woodland outlines are checked.

      Contour accuracy is tested if the operator has noted areas that may be weak. The determination of names involves extensive local inquiry, as do political lines, and both may require research of records.

      In remote areas it is more efficient to combine the above activities with supplemental control survey to avoid the extra field phase. Then the photos must be carefully examined and annotated for the compiler, while buildings must be encircled or pricked. Roads are classified and political lines located in the usual manner and noted on the photos or overlays.

      Field corrections are applied to the original manuscripts. They must be scribed (engraved) on the originals so that guide copies can be prepared by contact printing for final colour-separation scribing. At this time all factual detail is carefully checked. Editing may proceed, to conserve time, while the colour-separation scribing is in progress. The editor reviews all names, boundaries, and related data, comparing them to information thereon that may be available from other sources. The editor's function is to see that the map conforms to standard conventions and is clear, legible, and free of errors.

      Controversial names, or those found to be in confused or ambiguous spelling or usage, are documented and referred to an appropriate official body. The designation of type styles and sizes as well as placement of lettering is another function of the map editor.

      Because modern topographic maps are printed in several colours, separate plates must be prepared for each. Some of the earliest maps were printed from woodcuts, usually in a single colour. Various hand processes were developed through the years, culminating in the fine rendering of copperplate engraving, which dominated the map production industry for many years. The process became obsolete, however, with increased production demands and the development of efficient printing presses. After World War II engraving on glass, and later on coated plastic sheets, was developed to a point that recovered the fineness of copper engraving. These methods of engraving have become firmly established in map production throughout the world.

Scribing
      In the negative engraving or scribing process, guide copy is printed on several sheets of plastic coated with an opaque paint, usually yellow. The scriber follows copy on the respective plates by engraving through the coating. Because arc light can pass only through the engraving scratches, the completed engravings are, in effect, negatives from which the press plates are made. The finest lines (0.002 inch, or 0.05 millimetre, wide), such as intermediate contours, are engraved freehand. Heavier lines, such as index contours, engraved at 0.007 inch, may require a small tripod to assure that the scriber is perfectly vertical. Gravers for double-lined roads, others for buildings, and templates, or patterns, for a variety of symbols are used. Woodland and similar boundaries and shorelines are contact printed and etched on their respective coated sheets, and the areas of the woodland or water are then peeled off, leaving open windows for their respective features. If portions of scrub, orchard, or vineyard are contained in the “woodland” plate, negative sections for these are stripped into their respective locations. Press plates are then processed from the negatives.

      A combined-colour proof is then made by successively printing the several completed negatives on a sensitized white plastic sheet that serves for the final checking and review of all aspects of the map. After all corrections have been made, the negatives are ready for the reproduction process.

      Nearly all maps are now printed by rotary offset presses, using flexible aluminum-alloy printing plates. The system uses surface plates (very slightly raised or recessed) as opposed to the letterpress and intaglio processes, which involve greater image heights and depths respectively. In the printing sequence, ink goes from the plate to a rubber blanket to the paper. Thus, the printing plate is positive, or right-reading, as is the printed map. The negatives from which the printing plates are prepared are accordingly wrong-reading. This is the process for so-called surface plates. To retain fineness of line on very long runs (10,000 or more impressions), some map printers prefer “etched” plates, prepared from film positives. Both may be considered essentially surface plates, however, since the respective raise or recess is quite small.

      Presses are of many varieties and makes. Huge multicolour types are used in large plants, printing several colours at a time. In effect, a multicolour press is several presses built into one. Each unit has three cylinders for plate, rubber blanket, and paper as well as rollers for water and ink. Presses with automatic feed may produce as many as 6,000 impressions per hour, while hand-fed types are limited to about 2,500 per hour.

Nautical charts
      Nautical charts are commonly large, 28 by 40 inches (70 centimetres by 1 metre) being an internationally accepted maximum size. In order that a navigator may work with them efficiently, charts must be kept with a minimum of folding in drawers in a large chart table in a compartment of the ship having ready access to the navigating bridge, known as the chart room or chart house. Such structures are not possible in small craft, which therefore require charts of a more convenient size. With the recognition that there are many more small boats in the world, particularly recreational craft, than there are ships and that they are navigated primarily by piloting rather than by celestial or electronic means, many hydrographic offices have given attention to the production of special chart series in a small format for yacht navigators.

      A typical series is that produced by the U.S. Coast and Geodetic Survey with the designation SC (for small craft). Such charts are only 15 inches (38 centimetres) in the vertical dimension and thus need to be folded only in the vertical direction. Printed on both sides of the sheet, they are oriented along the most probable route rather than by parallels and meridians. Several are stapled together into a stiff cardboard folder for protection. Along with the ordinary chart information, they contain a year of tide tables and information on small-craft facilities in the area. New editions are produced annually.

      Practical uses of charts impose some constraints on the selection of colour. Red, for example, would logically be chosen as the color in which to print warnings of navigational hazards. But navigators, who must work at night, prefer to retain the darkness adaptation of their eyes by viewing their charts under red light. Under such illumination, red, orange, and buff are invisible. Hence these colours have been superseded by magenta, purple, and gray.

      Charts are working instruments, and, since ships often voyage far from where replacement charts are readily obtainable, hydrographic offices give attention to the quality of the paper on which charts are printed. A ship's reckoning is kept in pencil and erased after each voyage. Thus, printing stock that permits multiple erasures is chosen. In view of the environment where charts are used, another quality commonly sought is high wet strength.

Automation in mapping
      During the past few decades, there was much interest in the automation of mapping processes, and considerable progress was made in this area. Achievements in the fields of electronics, high-speed digital computers, and related technologies provided a favourable period for such progress. In Great Britain, development of a set of procedures utilizing automatic elements, known as the Oxford System, was begun.

      Some success was also achieved in the difficult area of automatic plotting. Instruments now available can automatically scan a stereo model and generate approximate profiles from which contours may be interpolated. Some steps, however, must be closely monitored or else performed completely by the operator. Contouring interpolated from a profile scan is inferior to an operator's delineation. This contouring meets some less exacting requirements for elevation data, and refinements in the system are improving its precision. The need for human intervention when automatic devices get “lost” is not a decisive drawback, as one operator can monitor several machines. The reduction of tedious and repetitive steps for stereo-operators offers a significant advancement.

      Coordinatographs with high repeat accuracies facilitate the automatic plotting of control points and projection intersections. Line work can also be drafted or scribed automatically by the same process, but the respective features must first be coded to provide the necessary input tapes. Automatic colour scanning and discrimination is operational but has not become widely used; it is still necessary for an operator to trace the various features on the manuscript to code them. Obviously, little is to be gained by automatic scribing until the input can be provided automatically. Coded line work can be displayed on a cathode-ray tube and corrected with a light pen, but it is much simpler to check and correct the manuscript or finished drawing. Systems of automatic type placement at present offer only marginal advantages over conventional methods. In short, automation has made substantial advances but has not become fully operational in a practical sense.

      An aspect of automation that is developing rapidly concerns graphic data acquisition, storage, and retrieval. Data banks are being accumulated by specialized users of topographic information, often to produce thematic maps showing soil types, vegetation classifications, and a variety of other information. Such data banks are usually organized in two parts: one for line work, such as boundaries, and the other for descriptive information or classifications. Assuming that the necessary inputs have been made to the data bank, special plats can be generated speedily. Examples of such graphics include profiles showing elevations along a selected radio propagation path and cross sections for earthwork on roads and other construction.

Charles F. Fuechsel Ed.

Additional Reading

History of cartography
A list of sources on the topic is presented in Walter W. Ristow, Guide to the History of Cartography: An Annotated List of References on the History of Maps and Mapmaking (1973). Robert C. Duru, Maps and Map Making (1977); and G.R. Crone, Maps and Their Makers: An Introduction to the History of Cartography, 5th ed. (1978), are brief overviews. Essential aspects are explored in Leo Bagrow, History of Cartography, 2nd ed., rev. by R.A. Skelton (1985, originally published in German, 1951); Charles Bricker, Landmarks of Mapmaking: An Illustrated Survey of Maps and Mapmakers (1968; also published as A History of Cartography: 2500 Years of Maps and Mapmakers, 1969; reissued 1977); Lloyd A. Brown, The Story of Maps (1949, reprinted 1979), and Map Making: The Art That Became a Science (1960); Edward Lynam, The Mapmaker's Art: Essays on the History of Maps (1953); and John Noble Wilford, The Mapmakers (1981). Maps of specific periods are studied in Charles H. Hapgood, Maps of the Ancient Sea Kings: Evidence of Advanced Civilization in the Ice Age, rev. ed. (1979); R.A. Skelton, Decorative Printed Maps of the 15th to 18th Centuries (1952, reprinted 1966); Hugh Cortazzi, Isles of Gold: Antique Maps of Japan (1983); and Raymond Lister, How to Identify Old Maps and Globes: With a List of Cartographers, Engravers, Publishers, and Printers Concerned with Printed Maps and Globes from c. 1500 to c. 1850 (1965).The development of cartographic institutions can be traced in Mary Blewitt, Surveys of the Seas: A Brief History of British Hydrography (1957); Sir Archibald Day, The Admiralty Hydrographic Service, 1795–1919 (1967); Adrian H.W. Robinson, Marine Cartography in Britain: A History of the Sea Chart to 1855 (1962); and G.S. Ritchie, The Admiralty Chart: British Naval Hydrography in the Nineteenth Century (1967).

Mapmaking
The procedures involved in creating a map are described in many books, including Wellman Chamberlin, The Round Earth on Flat Paper: Map Projections Used by Cartographers (1947); Arthur D. Merriman, An Introduction to Map Projections (1947); Erwin J. Raisz, General Cartography, 2nd ed. (1948), and Principles of Cartography (1962); Eduard Imhof, Cartographic Relief Presentation (1982; originally published in German, 1965); J.S. Keates, Cartographic Design and Production (1973); Arthur H. Robinson et al., Elements of Cartography, 5th ed. (1984); John Loxton, Practical Map Production (1980); and Morris M. Thompson, Maps for America: Cartographic Products of the U.S. Geological Survey and Others, 2nd ed. (1981). A range of special projects, of which cartography is an essential part, are described in A.H.A. Hogg, Surveying for Archaeologists and Other Fieldworkers (1980); Teodor J. Blachut, Adam Chrzanowski, and Jouko H. Saastamoinen, Urban Surveying and Mapping (1979); P.F. Dale, Cadastral Surveys Within the Commonwealth (1976); S. Rowton Simpson, Land Law and Registration (1976); R.A. Skelton, The Legal Elements of Boundaries and Adjacent Properties (1930); Curtis M. Brown, Walter G. Robillard, and Donald A. Wilson, Evidence and Procedures for Boundary Location, 2nd ed. (1981); T.W. Birch, Maps: Topographical and Statistical, 2nd ed. (1964, reprinted with corrections, 1976); B.W. Lucke, A Course on the Chart (1966); M. Chriss and G.R. Hayes, An Introduction to Charts and Their Use, 4th ed. (1977); and D.A. Moore, Marine Chartwork, 2nd ed. (1981).

Technical developments
The many special studies in the field include Chester C. Slama (ed.), Manual of Photogrammetry, 4th ed. (1980); John Wright, Ground and Air Survey for Field Scientists (1982); C.D. Burnside, Electromagnetic Distance Measurement, 2nd ed. (1982); and William Ritchie et al., Mapping for Field Scientists: A Problem-Solving Approach (1977). Current developments are covered in special journals: Surveying and Mapping (quarterly); Photogrammetria (bimonthly); Military Engineer (bimonthly); The American Cartographer (semiannual); Cartography (semiannual); and Cartographica (quarterly).Charles F. Fuechsel

* * *


Universalium. 2010.

Игры ⚽ Поможем сделать НИР
Synonyms:

Look at other dictionaries:

  • Map — Cette page d’homonymie répertorie les différents sujets et articles partageant un même nom. {{{image}}}   Sigles d une seule lettre   Sigles de deux lettres > Sigles de trois lettres …   Wikipédia en Français

  • map — Ⅰ. map UK US /mæp/ noun [C] GRAPHS & CHARTS ► a drawing of the Earth s surface, or part of it, showing things such as the shape and position of countries, political borders, towns, rivers, etc.: on a map »Many of these students could not even… …   Financial and business terms

  • map — ► NOUN 1) a flat diagram of an area of land or sea showing physical features, cities, roads, etc. 2) a diagram or collection of data showing the arrangement, distribution, or sequence of something. ► VERB (mapped, mapping) 1) represent or record… …   English terms dictionary

  • map — [map] n. [ML mappa (mundi), map (of the world) < L mappa, napkin, cloth (on which maps were painted): said (by QUINTILIAN) to be of Punic orig.; prob. < TalmudHeb mappa < * manpa, contr. < menafa, a fluttering banner] 1. a drawing or… …   English World dictionary

  • Map — Map, v. t. [imp. & p. p. {Mapped}; p. pr. & vb. n. {Mapping}.] To represent by a map; often with out; as, to survey and map, or map out, a county. Hence, figuratively: To represent or indicate systematically and clearly; to sketch; to plan; as,… …   The Collaborative International Dictionary of English

  • Map — (m[a^]p), n. [From F. mappe, in mappemonde map of the world, fr. L. mappa napkin, signal cloth; a Punic word. Cf. {Apron}, {Napkin}, {Nappe}.] 1. A representation of the surface of the earth, or of some portion of it, showing the relative… …   The Collaborative International Dictionary of English

  • MAP — se refiere a: MAPFRE, empresa española de seguros cuyo ticker en la Bolsa de Madrid es MAP. Médico de atención primaria: sinónimo de médico de cabecera. Ministerio de Administraciones Públicas (España). Museo de Arte Precolombino (Cusco, Perú).… …   Wikipedia Español

  • MAP — 〈EDV; Abk. für engl.〉 Manufacturing Automation Protocol, Modell für die Datenübertragung zw. Rechnern verschiedener Arbeitsbereiche [engl., „automatisierte Protokollherstellung“] * * * MAP   [Abk. für Manufacturing Automation Protocol, dt.… …   Universal-Lexikon

  • .map — map,   Erweiterung für eine sog. Map Datei, d. h. für eine Datei, welche die Koordinaten von verweissensitiven (interaktiven) Grafiken sowie die zugeordneten URL Adressen enthält …   Universal-Lexikon

  • Map — [map] Walter 1140? 1209?; Welsh poet & satirist: also, Latin name, Mapes [māps, mā′pēz΄] …   English World dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”