panning

▪ mining

      in mining, simple method of separating particles of greater specific gravity (especially gold) from soil or gravels by washing in a pan with water. Panning is one of the principal techniques of the individual prospector for recovering gold and diamonds (diamond) in placer (alluvial) deposits (placer deposit).

      The typical pan is a light but rugged circular metal dish with a flat bottom and sides that slope out at about 45°. Its inner surface must be smooth and free from grease and rust. In panning for gold from streams, the pan is first filled halfway or so with gravel, soil, and rocks from places where the current is slower (such as downstream of boulders or on the inner side of bends in the stream). The pan is then immersed in the water, and the mixture is thoroughly wetted and stirred. Lumps of clay are broken up, and large stones are picked out. The pan, still under water, is then given a combination shaking and gyratory motion. This allows the heavy particles to settle and brings the lighter material to the surface. At intervals the pan is tilted, and the light surface material is washed off. This process is continued until only heavy “black sands” (such as ilmenite, magnetite, and pyrite) and gold remain. The material is dried and the gold removed (perhaps after using a magnet to remove some of the black sand). Panning is slow, backbreaking work, but in experienced hands there is little or no loss of gold. See also placer mining.

William Andrew Hustrulid

 

* * *